|
FhSim
3.1.0
Marine systems simulation
|
What a net panel adds beyond its load and weight in water. Net/NetStructure uses the defaults.
#include <NetElement3N.h>
Public Attributes | |
| bool | twineStructure = true |
| double | dampingRatio = 1.0 |
NetDampingRatio: the damping ratio of the panel's stiffest stretch mode, 1 = critical. The twine tension gets a Kelvin-Voigt dashpot, T = max(0, EA (L - L0 + tau rate) / L0) per bar family, tau = 2 * it * sqrt(m / k) (net_element_forces::PanelTensionDampingTime); the old isotropic relative-velocity term (2 * it * sqrt(m) kg/s, about 1 % of critical on the stretch mode) stays and damps the soft modes. Unused without twineStructure. | |
| bool NetPanelOptions::twineStructure = true |
Twine tension (EA) and structural damping. False in Net/NetStructureWithConstraints: an adapter choice (owner ruling Q3d, 2026-10-14), the constraint solver holds the lengths. Off skips both terms, so the panel adds its load law's force and its weight in water only.