FhSim  3.1.0
Marine systems simulation
Loading...
Searching...
No Matches
Validation: Rudi 1988 and Løland 1991 (L5, L6)

Table of Contents

Rudi et al. (1988) towed panels as KF2012 Fig. 5 plots them (angle dependence, L5), and Løland's (1991) fit to them, KF2012 Eq. 4 (L6, asserted at the inter-dataset spread).

Known misfit, disclosed by owner decision (2026-09-27; lift revised by the ruling of 2026-10-13, MARE-0110; drag angle form revised by the ruling of 2026-10-20, ENV-0120; lift angle form by the ruling of 2026-10-21, ENV-0125). The default law LocalThroughFlow takes its lift from the MF2022 Eq. 10 lift-to-drag ratio and agrees with MF2022 at 0° and 45°. Its drag angle form is option O1 of the ENV-0120 prototype, a3 = 0.017 and a5 = 0.053 (a3 + a5 = 0.07 keeps 0° and 45°); it still misses Rudi and Zhan at 30–80° by 0.002–0.006 in four rows (about Rudi's digitising error, accepted by the owner; ENV-0120 is resolved). The lift angle form follows Rudi with a sixth harmonic pinned at 45°, b4 = 0.092 and b6 = 0.105 (ENV-0125, resolved); three Rudi rows still fail (Sn 0.144 at 80°, Sn 0.317 at 60° and 80°), and Løland's pure sin 2θ is not followed. Zhan's speed trend is put down to frame deformation, not to the panel law. 3 load-law tests fail and stay DISABLED_, each with its reason in 11.4 The default law's lift and angle form against the data (MARE-0110, MARE-0131); nothing is tuned to pass them.

Generated 2026-10-22 from commit e12656c 2026-10-22 (with uncommitted changes under src/ or tests/); tests run 2026-10-22T11:39:52.126.

Tests

Status from the gtest XML of the last run. A DISABLED_ test fails against the current laws; its numbers are in the tables below, and it stays disabled until the owner decides the issue.

Test Source Status Issues Owner question
PanelLoadLaw_Loland.DISABLED_L6_LiftCoefficient_LocalThroughFlow PanelLoadLaw_Loland_Test.cpp:123 DISABLED (fails when run) ENV-0125 (resolved); none open –
PanelLoadLaw_Loland.WritesReport PanelLoadLaw_Loland_Test.cpp:128 passed – –
PanelLoadLaw_Rudi.DISABLED_L5_LiftAngleDependence_LocalThroughFlow PanelLoadLaw_Rudi_Test.cpp:38 DISABLED (fails when run) ENV-0125 (resolved), MARE-0110 (fhsim_marine_elements, resolved); none open –
PanelLoadLaw_Rudi.WritesReport PanelLoadLaw_Rudi_Test.cpp:43 passed – –

PanelLoadLaw Rudi report

tests/out/PanelLoadLaw_Rudi_report.txt, as the test wrote it.

PanelLoadLaw Rudi report (plan L5, MARE-0093). Rudi et al. 1988 via KF2012 Fig. 5.

Conventions: error = model/measured - 1 (in %) for loads and coefficients, model - measured for ratios and localCd; ratio = measured/model; margin = tolerance - |error| (negative = fails).

Readings: ratios normalised on the same net and speed, averaged over the speeds 0.159, 0.316, 0.966 m/s of the notes; nominal twine 1.0 mm, rho 1000, nu 1.0e-06 (they do not affect the ratios of LocalThroughFlow). Absolute errors.

L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails)

reported; 24 rows, 3 of 24 outside the tolerance.

Chart: L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails); L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported); L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported).

Model minus measurement per case with the tolerance band L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails) L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported) L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported) L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported) L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported) tolerance ±0.08 -0.2 -0.1 0 0.1 model − measured; shaded: tolerance Sn 0.130 CD( 0)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.130 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.130 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.130 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.130 CD(30)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.130 CD(30)/CD(0): measured 0.845, model 0.7595, error -0.085, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.130 CD(30)/CD(0): measured 0.845, model 0.866, error 0.021, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.130 CD(30)/CD(0): measured 0.845, model 0.7514, error -0.094, tolerance ±0.08 Sn 0.130 CD(45)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.130 CD(45)/CD(0): measured 0.655, model 0.6081, error -0.047, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.130 CD(45)/CD(0): measured 0.655, model 0.7071, error 0.052, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.130 CD(45)/CD(0): measured 0.655, model 0.52, error -0.135, tolerance ±0.08 Sn 0.130 CD(60)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.130 CD(60)/CD(0): measured 0.483, model 0.4745, error -0.008, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.130 CD(60)/CD(0): measured 0.483, model 0.5, error 0.017, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.130 CD(60)/CD(0): measured 0.483, model 0.3015, error -0.181, tolerance ±0.08 Sn 0.130 CD(80)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.130 CD(80)/CD(0): measured 0.276, model 0.1936, error -0.082, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.130 CD(80)/CD(0): measured 0.276, model 0.1736, error -0.102, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.130 CD(80)/CD(0): measured 0.276, model 0.08451, error -0.191, tolerance ±0.08 Sn 0.130 CD(90)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.130 CD(90)/CD(0): measured 0, model 7.005e-17, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.130 CD(90)/CD(0): measured 0, model 6.123e-17, error 0.000, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.130 CD(90)/CD(0): measured 0, model 2.882e-17, error 0.000, tolerance ±0.08 Sn 0.144 CD( 0)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.144 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.144 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.144 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.144 CD(30)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.144 CD(30)/CD(0): measured 0.778, model 0.7595, error -0.018, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.144 CD(30)/CD(0): measured 0.778, model 0.866, error 0.088, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.144 CD(30)/CD(0): measured 0.778, model 0.7742, error -0.004, tolerance ±0.08 Sn 0.144 CD(45)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.144 CD(45)/CD(0): measured 0.635, model 0.6081, error -0.027, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.144 CD(45)/CD(0): measured 0.635, model 0.7071, error 0.072, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.144 CD(45)/CD(0): measured 0.635, model 0.5571, error -0.078, tolerance ±0.08 Sn 0.144 CD(60)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.144 CD(60)/CD(0): measured 0.492, model 0.4745, error -0.018, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.144 CD(60)/CD(0): measured 0.492, model 0.5, error 0.008, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.144 CD(60)/CD(0): measured 0.492, model 0.3409, error -0.151, tolerance ±0.08 Sn 0.144 CD(80)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.144 CD(80)/CD(0): measured 0.238, model 0.1936, error -0.044, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.144 CD(80)/CD(0): measured 0.238, model 0.1736, error -0.064, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.144 CD(80)/CD(0): measured 0.238, model 0.1022, error -0.136, tolerance ±0.08 Sn 0.144 CD(90)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.144 CD(90)/CD(0): measured 0.032, model 7.005e-17, error -0.032, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.144 CD(90)/CD(0): measured 0.032, model 6.123e-17, error -0.032, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.144 CD(90)/CD(0): measured 0.032, model 3.526e-17, error -0.032, tolerance ±0.08 Sn 0.184 CD( 0)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.184 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.184 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.184 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.184 CD(30)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.184 CD(30)/CD(0): measured 0.736, model 0.7595, error 0.024, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.184 CD(30)/CD(0): measured 0.736, model 0.866, error 0.130, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.184 CD(30)/CD(0): measured 0.736, model 0.8046, error 0.069, tolerance ±0.08 Sn 0.184 CD(45)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.184 CD(45)/CD(0): measured 0.626, model 0.6081, error -0.018, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.184 CD(45)/CD(0): measured 0.626, model 0.7071, error 0.081, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.184 CD(45)/CD(0): measured 0.626, model 0.6068, error -0.019, tolerance ±0.08 Sn 0.184 CD(60)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.184 CD(60)/CD(0): measured 0.549, model 0.4745, error -0.074, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.184 CD(60)/CD(0): measured 0.549, model 0.5, error -0.049, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.184 CD(60)/CD(0): measured 0.549, model 0.3936, error -0.155, tolerance ±0.08 Sn 0.184 CD(80)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.184 CD(80)/CD(0): measured 0.231, model 0.1936, error -0.037, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.184 CD(80)/CD(0): measured 0.231, model 0.1736, error -0.057, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.184 CD(80)/CD(0): measured 0.231, model 0.1259, error -0.105, tolerance ±0.08 Sn 0.184 CD(90)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.184 CD(90)/CD(0): measured 0.011, model 7.005e-17, error -0.011, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.184 CD(90)/CD(0): measured 0.011, model 6.123e-17, error -0.011, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.184 CD(90)/CD(0): measured 0.011, model 4.386e-17, error -0.011, tolerance ±0.08 Sn 0.317 CD( 0)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.317 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.317 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.317 CD( 0)/CD(0): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.317 CD(30)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.317 CD(30)/CD(0): measured 0.792, model 0.7595, error -0.032, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.317 CD(30)/CD(0): measured 0.792, model 0.866, error 0.074, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.317 CD(30)/CD(0): measured 0.792, model 0.8014, error 0.009, tolerance ±0.08 Sn 0.317 CD(45)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.317 CD(45)/CD(0): measured 0.575, model 0.6081, error 0.033, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.317 CD(45)/CD(0): measured 0.575, model 0.7071, error 0.132, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.317 CD(45)/CD(0): measured 0.575, model 0.6016, error 0.027, tolerance ±0.08 Sn 0.317 CD(60)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.317 CD(60)/CD(0): measured 0.389, model 0.4745, error 0.086, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.317 CD(60)/CD(0): measured 0.389, model 0.5, error 0.111, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.317 CD(60)/CD(0): measured 0.389, model 0.3881, error -0.001, tolerance ±0.08 Sn 0.317 CD(80)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.317 CD(80)/CD(0): measured 0.131, model 0.1936, error 0.063, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.317 CD(80)/CD(0): measured 0.131, model 0.1736, error 0.043, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.317 CD(80)/CD(0): measured 0.131, model 0.1234, error -0.008, tolerance ±0.08 Sn 0.317 CD(90)/CD(0) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_D(theta)/C_D(0) (reported, fails): Sn 0.317 CD(90)/CD(0): measured 0.023, model 7.005e-17, error -0.023, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported): Sn 0.317 CD(90)/CD(0): measured 0.023, model 6.123e-17, error -0.023, tolerance ±0.08 L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported): Sn 0.317 CD(90)/CD(0): measured 0.023, model 4.295e-17, error -0.023, tolerance ±0.08

Case Measured Model Error Tolerance Margin Result
Sn 0.130 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.130 CD(30)/CD(0) 0.845 0.7595 -0.085 ±0.08 -0.005 outside
Sn 0.130 CD(45)/CD(0) 0.655 0.6081 -0.047 ±0.08 0.033 within
Sn 0.130 CD(60)/CD(0) 0.483 0.4745 -0.008 ±0.08 0.072 within
Sn 0.130 CD(80)/CD(0) 0.276 0.1936 -0.082 ±0.08 -0.002 outside
Sn 0.130 CD(90)/CD(0) 0 7.005e-17 0 ±0.08 0.08 within
Sn 0.144 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.144 CD(30)/CD(0) 0.778 0.7595 -0.018 ±0.08 0.062 within
Sn 0.144 CD(45)/CD(0) 0.635 0.6081 -0.027 ±0.08 0.053 within
Sn 0.144 CD(60)/CD(0) 0.492 0.4745 -0.018 ±0.08 0.062 within
Sn 0.144 CD(80)/CD(0) 0.238 0.1936 -0.044 ±0.08 0.036 within
Sn 0.144 CD(90)/CD(0) 0.032 7.005e-17 -0.032 ±0.08 0.048 within
Sn 0.184 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.184 CD(30)/CD(0) 0.736 0.7595 0.024 ±0.08 0.056 within
Sn 0.184 CD(45)/CD(0) 0.626 0.6081 -0.018 ±0.08 0.062 within
Sn 0.184 CD(60)/CD(0) 0.549 0.4745 -0.074 ±0.08 0.006 within
Sn 0.184 CD(80)/CD(0) 0.231 0.1936 -0.037 ±0.08 0.043 within
Sn 0.184 CD(90)/CD(0) 0.011 7.005e-17 -0.011 ±0.08 0.069 within
Sn 0.317 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.317 CD(30)/CD(0) 0.792 0.7595 -0.032 ±0.08 0.048 within
Sn 0.317 CD(45)/CD(0) 0.575 0.6081 0.033 ±0.08 0.047 within
Sn 0.317 CD(60)/CD(0) 0.389 0.4745 0.086 ±0.08 -0.006 outside
Sn 0.317 CD(80)/CD(0) 0.131 0.1936 0.063 ±0.08 0.017 within
Sn 0.317 CD(90)/CD(0) 0.023 7.005e-17 -0.023 ±0.08 0.057 within

L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails)

DISABLED test; 24 rows, 3 of 24 outside the tolerance.

Chart: L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails); L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported).

Model minus measurement per case with the tolerance band L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails) L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported) L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported) tolerance ±0.08 -0.3 -0.2 -0.1 0 0.1 model − measured; shaded: tolerance Sn 0.130 CL( 0)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.130 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.130 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 Sn 0.130 CL(30)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.130 CL(30)/CL(45): measured 1, model 1.037, error 0.037, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.130 CL(30)/CL(45): measured 1, model 0.866, error -0.134, tolerance ±0.08 Sn 0.130 CL(45)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.130 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.130 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.130 CL(60)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.130 CL(60)/CL(45): measured 0.909, model 0.8773, error -0.032, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.130 CL(60)/CL(45): measured 0.909, model 0.866, error -0.043, tolerance ±0.08 Sn 0.130 CL(80)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.130 CL(80)/CL(45): measured 0.455, model 0.4097, error -0.045, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.130 CL(80)/CL(45): measured 0.455, model 0.342, error -0.113, tolerance ±0.08 Sn 0.130 CL(90)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.130 CL(90)/CL(45): measured 0, model 1.514e-16, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.130 CL(90)/CL(45): measured 0, model 1.225e-16, error 0.000, tolerance ±0.08 Sn 0.144 CL( 0)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.144 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.144 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 Sn 0.144 CL(30)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.144 CL(30)/CL(45): measured 1.091, model 1.037, error -0.054, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.144 CL(30)/CL(45): measured 1.091, model 0.866, error -0.225, tolerance ±0.08 Sn 0.144 CL(45)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.144 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.144 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.144 CL(60)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.144 CL(60)/CL(45): measured 0.909, model 0.8773, error -0.032, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.144 CL(60)/CL(45): measured 0.909, model 0.866, error -0.043, tolerance ±0.08 Sn 0.144 CL(80)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.144 CL(80)/CL(45): measured 0.636, model 0.4097, error -0.226, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.144 CL(80)/CL(45): measured 0.636, model 0.342, error -0.294, tolerance ±0.08 Sn 0.144 CL(90)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.144 CL(90)/CL(45): measured 0, model 1.514e-16, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.144 CL(90)/CL(45): measured 0, model 1.225e-16, error 0.000, tolerance ±0.08 Sn 0.184 CL( 0)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.184 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.184 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 Sn 0.184 CL(30)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.184 CL(30)/CL(45): measured 1, model 1.037, error 0.037, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.184 CL(30)/CL(45): measured 1, model 0.866, error -0.134, tolerance ±0.08 Sn 0.184 CL(45)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.184 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.184 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.184 CL(60)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.184 CL(60)/CL(45): measured 0.8, model 0.8773, error 0.077, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.184 CL(60)/CL(45): measured 0.8, model 0.866, error 0.066, tolerance ±0.08 Sn 0.184 CL(80)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.184 CL(80)/CL(45): measured 0.35, model 0.4097, error 0.060, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.184 CL(80)/CL(45): measured 0.35, model 0.342, error -0.008, tolerance ±0.08 Sn 0.184 CL(90)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.184 CL(90)/CL(45): measured 0, model 1.514e-16, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.184 CL(90)/CL(45): measured 0, model 1.225e-16, error 0.000, tolerance ±0.08 Sn 0.317 CL( 0)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.317 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.317 CL( 0)/CL(45): measured 0, model 0, error 0.000, tolerance ±0.08 Sn 0.317 CL(30)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.317 CL(30)/CL(45): measured 1.019, model 1.037, error 0.018, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.317 CL(30)/CL(45): measured 1.019, model 0.866, error -0.153, tolerance ±0.08 Sn 0.317 CL(45)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.317 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.317 CL(45)/CL(45): measured 1, model 1, error 0.000, tolerance ±0.08 Sn 0.317 CL(60)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.317 CL(60)/CL(45): measured 0.769, model 0.8773, error 0.108, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.317 CL(60)/CL(45): measured 0.769, model 0.866, error 0.097, tolerance ±0.08 Sn 0.317 CL(80)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.317 CL(80)/CL(45): measured 0.308, model 0.4097, error 0.102, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.317 CL(80)/CL(45): measured 0.308, model 0.342, error 0.034, tolerance ±0.08 Sn 0.317 CL(90)/CL(45) L5 LocalThroughFlow (a3 0.017, a5 0.053, b4 0.092, b6 0.105), C_L(theta)/C_L(45) (DISABLED_, fails): Sn 0.317 CL(90)/CL(45): measured 0, model 1.514e-16, error 0.000, tolerance ±0.08 L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported): Sn 0.317 CL(90)/CL(45): measured 0, model 1.225e-16, error 0.000, tolerance ±0.08

Case Measured Model Error Tolerance Margin Result
Sn 0.130 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.130 CL(30)/CL(45) 1 1.037 0.037 ±0.08 0.043 within
Sn 0.130 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.130 CL(60)/CL(45) 0.909 0.8773 -0.032 ±0.08 0.048 within
Sn 0.130 CL(80)/CL(45) 0.455 0.4097 -0.045 ±0.08 0.035 within
Sn 0.130 CL(90)/CL(45) 0 1.514e-16 0 ±0.08 0.08 within
Sn 0.144 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.144 CL(30)/CL(45) 1.091 1.037 -0.054 ±0.08 0.026 within
Sn 0.144 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.144 CL(60)/CL(45) 0.909 0.8773 -0.032 ±0.08 0.048 within
Sn 0.144 CL(80)/CL(45) 0.636 0.4097 -0.226 ±0.08 -0.146 outside
Sn 0.144 CL(90)/CL(45) 0 1.514e-16 0 ±0.08 0.08 within
Sn 0.184 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.184 CL(30)/CL(45) 1 1.037 0.037 ±0.08 0.043 within
Sn 0.184 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.184 CL(60)/CL(45) 0.8 0.8773 0.077 ±0.08 0.003 within
Sn 0.184 CL(80)/CL(45) 0.35 0.4097 0.06 ±0.08 0.02 within
Sn 0.184 CL(90)/CL(45) 0 1.514e-16 0 ±0.08 0.08 within
Sn 0.317 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.317 CL(30)/CL(45) 1.019 1.037 0.018 ±0.08 0.062 within
Sn 0.317 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.317 CL(60)/CL(45) 0.769 0.8773 0.108 ±0.08 -0.028 outside
Sn 0.317 CL(80)/CL(45) 0.308 0.4097 0.102 ±0.08 -0.022 outside
Sn 0.317 CL(90)/CL(45) 0 1.514e-16 0 ±0.08 0.08 within

L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_D ratio (reported)

reported; 24 rows, 6 of 24 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.130 CD(30)/CD(0) 0.845 0.866 0.021 ±0.08 0.059 within
Sn 0.130 CD(45)/CD(0) 0.655 0.7071 0.052 ±0.08 0.028 within
Sn 0.130 CD(60)/CD(0) 0.483 0.5 0.017 ±0.08 0.063 within
Sn 0.130 CD(80)/CD(0) 0.276 0.1736 -0.102 ±0.08 -0.022 outside
Sn 0.130 CD(90)/CD(0) 0 6.123e-17 0 ±0.08 0.08 within
Sn 0.144 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.144 CD(30)/CD(0) 0.778 0.866 0.088 ±0.08 -0.008 outside
Sn 0.144 CD(45)/CD(0) 0.635 0.7071 0.072 ±0.08 0.008 within
Sn 0.144 CD(60)/CD(0) 0.492 0.5 0.008 ±0.08 0.072 within
Sn 0.144 CD(80)/CD(0) 0.238 0.1736 -0.064 ±0.08 0.016 within
Sn 0.144 CD(90)/CD(0) 0.032 6.123e-17 -0.032 ±0.08 0.048 within
Sn 0.184 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.184 CD(30)/CD(0) 0.736 0.866 0.13 ±0.08 -0.05 outside
Sn 0.184 CD(45)/CD(0) 0.626 0.7071 0.081 ±0.08 -0.001 outside
Sn 0.184 CD(60)/CD(0) 0.549 0.5 -0.049 ±0.08 0.031 within
Sn 0.184 CD(80)/CD(0) 0.231 0.1736 -0.057 ±0.08 0.023 within
Sn 0.184 CD(90)/CD(0) 0.011 6.123e-17 -0.011 ±0.08 0.069 within
Sn 0.317 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.317 CD(30)/CD(0) 0.792 0.866 0.074 ±0.08 0.006 within
Sn 0.317 CD(45)/CD(0) 0.575 0.7071 0.132 ±0.08 -0.052 outside
Sn 0.317 CD(60)/CD(0) 0.389 0.5 0.111 ±0.08 -0.031 outside
Sn 0.317 CD(80)/CD(0) 0.131 0.1736 0.043 ±0.08 0.037 within
Sn 0.317 CD(90)/CD(0) 0.023 6.123e-17 -0.023 ±0.08 0.057 within

L5 LocalThroughFlow with a3 = a5 = b4 = b6 = 0 (first harmonics only), C_L ratio (reported)

reported; 24 rows, 7 of 24 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.130 CL(30)/CL(45) 1 0.866 -0.134 ±0.08 -0.054 outside
Sn 0.130 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.130 CL(60)/CL(45) 0.909 0.866 -0.043 ±0.08 0.037 within
Sn 0.130 CL(80)/CL(45) 0.455 0.342 -0.113 ±0.08 -0.033 outside
Sn 0.130 CL(90)/CL(45) 0 1.225e-16 0 ±0.08 0.08 within
Sn 0.144 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.144 CL(30)/CL(45) 1.091 0.866 -0.225 ±0.08 -0.145 outside
Sn 0.144 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.144 CL(60)/CL(45) 0.909 0.866 -0.043 ±0.08 0.037 within
Sn 0.144 CL(80)/CL(45) 0.636 0.342 -0.294 ±0.08 -0.214 outside
Sn 0.144 CL(90)/CL(45) 0 1.225e-16 0 ±0.08 0.08 within
Sn 0.184 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.184 CL(30)/CL(45) 1 0.866 -0.134 ±0.08 -0.054 outside
Sn 0.184 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.184 CL(60)/CL(45) 0.8 0.866 0.066 ±0.08 0.014 within
Sn 0.184 CL(80)/CL(45) 0.35 0.342 -0.008 ±0.08 0.072 within
Sn 0.184 CL(90)/CL(45) 0 1.225e-16 0 ±0.08 0.08 within
Sn 0.317 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.317 CL(30)/CL(45) 1.019 0.866 -0.153 ±0.08 -0.073 outside
Sn 0.317 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.317 CL(60)/CL(45) 0.769 0.866 0.097 ±0.08 -0.017 outside
Sn 0.317 CL(80)/CL(45) 0.308 0.342 0.034 ±0.08 0.046 within
Sn 0.317 CL(90)/CL(45) 0 1.225e-16 0 ±0.08 0.08 within

L5 ScreenMF2022 (a3 fitted per Sn, b4 0; Sn 0.130/0.144 outside Eq. 10 range), C_D ratio (reported)

reported; 24 rows, 8 of 24 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.130 CD(30)/CD(0) 0.845 0.7514 -0.094 ±0.08 -0.014 outside
Sn 0.130 CD(45)/CD(0) 0.655 0.52 -0.135 ±0.08 -0.055 outside
Sn 0.130 CD(60)/CD(0) 0.483 0.3015 -0.181 ±0.08 -0.101 outside
Sn 0.130 CD(80)/CD(0) 0.276 0.08451 -0.191 ±0.08 -0.111 outside
Sn 0.130 CD(90)/CD(0) 0 2.882e-17 0 ±0.08 0.08 within
Sn 0.144 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.144 CD(30)/CD(0) 0.778 0.7742 -0.004 ±0.08 0.076 within
Sn 0.144 CD(45)/CD(0) 0.635 0.5571 -0.078 ±0.08 0.002 within
Sn 0.144 CD(60)/CD(0) 0.492 0.3409 -0.151 ±0.08 -0.071 outside
Sn 0.144 CD(80)/CD(0) 0.238 0.1022 -0.136 ±0.08 -0.056 outside
Sn 0.144 CD(90)/CD(0) 0.032 3.526e-17 -0.032 ±0.08 0.048 within
Sn 0.184 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.184 CD(30)/CD(0) 0.736 0.8046 0.069 ±0.08 0.011 within
Sn 0.184 CD(45)/CD(0) 0.626 0.6068 -0.019 ±0.08 0.061 within
Sn 0.184 CD(60)/CD(0) 0.549 0.3936 -0.155 ±0.08 -0.075 outside
Sn 0.184 CD(80)/CD(0) 0.231 0.1259 -0.105 ±0.08 -0.025 outside
Sn 0.184 CD(90)/CD(0) 0.011 4.386e-17 -0.011 ±0.08 0.069 within
Sn 0.317 CD( 0)/CD(0) 1 1 0 ±0.08 0.08 within
Sn 0.317 CD(30)/CD(0) 0.792 0.8014 0.009 ±0.08 0.071 within
Sn 0.317 CD(45)/CD(0) 0.575 0.6016 0.027 ±0.08 0.053 within
Sn 0.317 CD(60)/CD(0) 0.389 0.3881 -0.001 ±0.08 0.079 within
Sn 0.317 CD(80)/CD(0) 0.131 0.1234 -0.008 ±0.08 0.072 within
Sn 0.317 CD(90)/CD(0) 0.023 4.295e-17 -0.023 ±0.08 0.057 within

L5 ScreenMF2022, C_L ratio (reported)

reported; 24 rows, 7 of 24 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.130 CL(30)/CL(45) 1 0.866 -0.134 ±0.08 -0.054 outside
Sn 0.130 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.130 CL(60)/CL(45) 0.909 0.866 -0.043 ±0.08 0.037 within
Sn 0.130 CL(80)/CL(45) 0.455 0.342 -0.113 ±0.08 -0.033 outside
Sn 0.130 CL(90)/CL(45) 0 1.225e-16 0 ±0.08 0.08 within
Sn 0.144 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.144 CL(30)/CL(45) 1.091 0.866 -0.225 ±0.08 -0.145 outside
Sn 0.144 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.144 CL(60)/CL(45) 0.909 0.866 -0.043 ±0.08 0.037 within
Sn 0.144 CL(80)/CL(45) 0.636 0.342 -0.294 ±0.08 -0.214 outside
Sn 0.144 CL(90)/CL(45) 0 1.225e-16 0 ±0.08 0.08 within
Sn 0.184 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.184 CL(30)/CL(45) 1 0.866 -0.134 ±0.08 -0.054 outside
Sn 0.184 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.184 CL(60)/CL(45) 0.8 0.866 0.066 ±0.08 0.014 within
Sn 0.184 CL(80)/CL(45) 0.35 0.342 -0.008 ±0.08 0.072 within
Sn 0.184 CL(90)/CL(45) 0 1.225e-16 0 ±0.08 0.08 within
Sn 0.317 CL( 0)/CL(45) 0 0 0 ±0.08 0.08 within
Sn 0.317 CL(30)/CL(45) 1.019 0.866 -0.153 ±0.08 -0.073 outside
Sn 0.317 CL(45)/CL(45) 1 1 0 ±0.08 0.08 within
Sn 0.317 CL(60)/CL(45) 0.769 0.866 0.097 ±0.08 -0.017 outside
Sn 0.317 CL(80)/CL(45) 0.308 0.342 0.034 ±0.08 0.046 within
Sn 0.317 CL(90)/CL(45) 0 1.225e-16 0 ±0.08 0.08 within

PanelLoadLaw Loland report

tests/out/PanelLoadLaw_Loland_report.txt, as the test wrote it.

PanelLoadLaw Loland report (plan L6, MARE-0093). Loland 1991 via KF2012 Eq. 4.

Conventions: error = model/measured - 1 (in %) for loads and coefficients, model - measured for ratios and localCd; ratio = measured/model; margin = tolerance - |error| (negative = fails).

Readings: Re = U d / (nu (1 - Sn)) (KF2012 Eq. 11, free stream) in {500, 1000, 2000, 5000, 10000}; nominal d 1.0 mm, rho 1000, nu 1.0e-06; Sn = K x Loland Sn. Asserted: K = 1, induction on, +-25 % (plan table). The plan text's +-20 % spread is shown as a second margin table.

L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %

20 rows, 1 of 20 outside the tolerance.

Chart: L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %; L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %; L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %; L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %.

Model minus measurement per case with the tolerance band L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 % tolerance ±25 % -20 0 20 40 model / measured − 1 [%]; shaded: tolerance Sn 0.130 Re 500 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.130 Re 500 CD( 0): measured 0.1427, model 0.1775, error 24.355 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.130 Re 500 CD( 0): measured 0.1427, model 0.2087, error 46.254 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.130 Re 500 CD( 0): measured 0.1427, model 0.1851, error 29.706 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.130 Re 500 CD( 0): measured 0.1427, model 0.2218, error 55.426 %, tolerance ±25 % Sn 0.130 Re 1000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.130 Re 1000 CD( 0): measured 0.1427, model 0.1547, error 8.400 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.130 Re 1000 CD( 0): measured 0.1427, model 0.182, error 27.525 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.130 Re 1000 CD( 0): measured 0.1427, model 0.1614, error 13.121 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.130 Re 1000 CD( 0): measured 0.1427, model 0.1936, error 35.644 %, tolerance ±25 % Sn 0.130 Re 2000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.130 Re 2000 CD( 0): measured 0.1427, model 0.1452, error 1.730 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.130 Re 2000 CD( 0): measured 0.1427, model 0.1712, error 19.979 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.130 Re 2000 CD( 0): measured 0.1427, model 0.1521, error 6.612 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.130 Re 2000 CD( 0): measured 0.1427, model 0.1832, error 28.410 %, tolerance ±25 % Sn 0.130 Re 5000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.130 Re 5000 CD( 0): measured 0.1427, model 0.1585, error 11.096 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.130 Re 5000 CD( 0): measured 0.1427, model 0.1873, error 31.235 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.130 Re 5000 CD( 0): measured 0.1427, model 0.1666, error 16.738 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.130 Re 5000 CD( 0): measured 0.1427, model 0.2012, error 40.965 %, tolerance ±25 % Sn 0.130 Re 10000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.130 Re 10000 CD( 0): measured 0.1427, model 0.1672, error 17.185 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.130 Re 10000 CD( 0): measured 0.1427, model 0.1973, error 38.237 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.130 Re 10000 CD( 0): measured 0.1427, model 0.1753, error 22.851 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.130 Re 10000 CD( 0): measured 0.1427, model 0.2111, error 47.910 %, tolerance ±25 % Sn 0.144 Re 500 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.144 Re 500 CD( 0): measured 0.1686, model 0.199, error 18.063 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.144 Re 500 CD( 0): measured 0.1686, model 0.2345, error 39.146 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.144 Re 500 CD( 0): measured 0.1686, model 0.2102, error 24.705 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.144 Re 500 CD( 0): measured 0.1686, model 0.253, error 50.072 %, tolerance ±25 % Sn 0.144 Re 1000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.144 Re 1000 CD( 0): measured 0.1686, model 0.1735, error 2.902 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.144 Re 1000 CD( 0): measured 0.1686, model 0.2045, error 21.314 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.144 Re 1000 CD( 0): measured 0.1686, model 0.1833, error 8.760 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.144 Re 1000 CD( 0): measured 0.1686, model 0.2208, error 30.983 %, tolerance ±25 % Sn 0.144 Re 2000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.144 Re 2000 CD( 0): measured 0.1686, model 0.1626, error -3.550 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.144 Re 2000 CD( 0): measured 0.1686, model 0.1922, error 14.029 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.144 Re 2000 CD( 0): measured 0.1686, model 0.1728, error 2.501 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.144 Re 2000 CD( 0): measured 0.1686, model 0.2091, error 24.070 %, tolerance ±25 % Sn 0.144 Re 5000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.144 Re 5000 CD( 0): measured 0.1686, model 0.1774, error 5.241 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.144 Re 5000 CD( 0): measured 0.1686, model 0.2101, error 24.655 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.144 Re 5000 CD( 0): measured 0.1686, model 0.1892, error 12.237 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.144 Re 5000 CD( 0): measured 0.1686, model 0.2297, error 36.243 %, tolerance ±25 % Sn 0.144 Re 10000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.144 Re 10000 CD( 0): measured 0.1686, model 0.1872, error 11.086 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.144 Re 10000 CD( 0): measured 0.1686, model 0.2214, error 31.372 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.144 Re 10000 CD( 0): measured 0.1686, model 0.1991, error 18.114 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.144 Re 10000 CD( 0): measured 0.1686, model 0.2409, error 42.901 %, tolerance ±25 % Sn 0.184 Re 500 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.184 Re 500 CD( 0): measured 0.2517, model 0.264, error 4.861 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.184 Re 500 CD( 0): measured 0.2517, model 0.3133, error 24.438 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.184 Re 500 CD( 0): measured 0.2517, model 0.2892, error 14.883 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.184 Re 500 CD( 0): measured 0.2517, model 0.3527, error 40.089 %, tolerance ±25 % Sn 0.184 Re 1000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.184 Re 1000 CD( 0): measured 0.2517, model 0.23, error -8.631 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.184 Re 1000 CD( 0): measured 0.2517, model 0.273, error 8.462 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.184 Re 1000 CD( 0): measured 0.2517, model 0.2522, error 0.194 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.184 Re 1000 CD( 0): measured 0.2517, model 0.3079, error 22.308 %, tolerance ±25 % Sn 0.184 Re 2000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.184 Re 2000 CD( 0): measured 0.2517, model 0.2148, error -14.668 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.184 Re 2000 CD( 0): measured 0.2517, model 0.256, error 1.686 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.184 Re 2000 CD( 0): measured 0.2517, model 0.2377, error -5.572 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.184 Re 2000 CD( 0): measured 0.2517, model 0.2922, error 16.057 %, tolerance ±25 % Sn 0.184 Re 5000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.184 Re 5000 CD( 0): measured 0.2517, model 0.2338, error -7.124 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.184 Re 5000 CD( 0): measured 0.2517, model 0.2794, error 10.974 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.184 Re 5000 CD( 0): measured 0.2517, model 0.2603, error 3.397 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.184 Re 5000 CD( 0): measured 0.2517, model 0.3211, error 27.562 %, tolerance ±25 % Sn 0.184 Re 10000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.184 Re 10000 CD( 0): measured 0.2517, model 0.2473, error -1.770 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.184 Re 10000 CD( 0): measured 0.2517, model 0.2948, error 17.121 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.184 Re 10000 CD( 0): measured 0.2517, model 0.2739, error 8.811 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.184 Re 10000 CD( 0): measured 0.2517, model 0.3364, error 33.644 %, tolerance ±25 % Sn 0.317 Re 500 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.317 Re 500 CD( 0): measured 0.6064, model 0.5296, error -12.654 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.317 Re 500 CD( 0): measured 0.6064, model 0.6513, error 7.409 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.317 Re 500 CD( 0): measured 0.6064, model 0.6591, error 8.699 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.317 Re 500 CD( 0): measured 0.6064, model 0.8522, error 40.540 %, tolerance ±25 % Sn 0.317 Re 1000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.317 Re 1000 CD( 0): measured 0.6064, model 0.4614, error -23.909 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.317 Re 1000 CD( 0): measured 0.6064, model 0.5674, error -6.428 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.317 Re 1000 CD( 0): measured 0.6064, model 0.5748, error -5.200 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.317 Re 1000 CD( 0): measured 0.6064, model 0.7452, error 22.897 %, tolerance ±25 % Sn 0.317 Re 2000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.317 Re 2000 CD( 0): measured 0.6064, model 0.4257, error -29.786 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.317 Re 2000 CD( 0): measured 0.6064, model 0.5279, error -12.935 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.317 Re 2000 CD( 0): measured 0.6064, model 0.5417, error -10.655 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.317 Re 2000 CD( 0): measured 0.6064, model 0.7125, error 17.510 %, tolerance ±25 % Sn 0.317 Re 5000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.317 Re 5000 CD( 0): measured 0.6064, model 0.4588, error -24.333 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.317 Re 5000 CD( 0): measured 0.6064, model 0.573, error -5.505 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.317 Re 5000 CD( 0): measured 0.6064, model 0.5932, error -2.169 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.317 Re 5000 CD( 0): measured 0.6064, model 0.7859, error 29.619 %, tolerance ±25 % Sn 0.317 Re 10000 CD( 0) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_D(0), tolerance 25 %: Sn 0.317 Re 10000 CD( 0): measured 0.6064, model 0.4886, error -19.425 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %: Sn 0.317 Re 10000 CD( 0): measured 0.6064, model 0.6073, error 0.152 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %: Sn 0.317 Re 10000 CD( 0): measured 0.6064, model 0.6243, error 2.954 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %: Sn 0.317 Re 10000 CD( 0): measured 0.6064, model 0.8195, error 35.156 %, tolerance ±25 %

Case Measured Model Error Tolerance Margin Result
Sn 0.130 Re 500 CD( 0) 0.1427 0.1775 24.355 % ±25.000 % 0.645 % within
Sn 0.130 Re 1000 CD( 0) 0.1427 0.1547 8.400 % ±25.000 % 16.600 % within
Sn 0.130 Re 2000 CD( 0) 0.1427 0.1452 1.730 % ±25.000 % 23.270 % within
Sn 0.130 Re 5000 CD( 0) 0.1427 0.1585 11.096 % ±25.000 % 13.904 % within
Sn 0.130 Re 10000 CD( 0) 0.1427 0.1672 17.185 % ±25.000 % 7.815 % within
Sn 0.144 Re 500 CD( 0) 0.1686 0.199 18.063 % ±25.000 % 6.937 % within
Sn 0.144 Re 1000 CD( 0) 0.1686 0.1735 2.902 % ±25.000 % 22.098 % within
Sn 0.144 Re 2000 CD( 0) 0.1686 0.1626 -3.550 % ±25.000 % 21.450 % within
Sn 0.144 Re 5000 CD( 0) 0.1686 0.1774 5.241 % ±25.000 % 19.759 % within
Sn 0.144 Re 10000 CD( 0) 0.1686 0.1872 11.086 % ±25.000 % 13.914 % within
Sn 0.184 Re 500 CD( 0) 0.2517 0.264 4.861 % ±25.000 % 20.139 % within
Sn 0.184 Re 1000 CD( 0) 0.2517 0.23 -8.631 % ±25.000 % 16.369 % within
Sn 0.184 Re 2000 CD( 0) 0.2517 0.2148 -14.668 % ±25.000 % 10.332 % within
Sn 0.184 Re 5000 CD( 0) 0.2517 0.2338 -7.124 % ±25.000 % 17.876 % within
Sn 0.184 Re 10000 CD( 0) 0.2517 0.2473 -1.770 % ±25.000 % 23.230 % within
Sn 0.317 Re 500 CD( 0) 0.6064 0.5296 -12.654 % ±25.000 % 12.346 % within
Sn 0.317 Re 1000 CD( 0) 0.6064 0.4614 -23.909 % ±25.000 % 1.091 % within
Sn 0.317 Re 2000 CD( 0) 0.6064 0.4257 -29.786 % ±25.000 % -4.786 % outside
Sn 0.317 Re 5000 CD( 0) 0.6064 0.4588 -24.333 % ±25.000 % 0.667 % within
Sn 0.317 Re 10000 CD( 0) 0.6064 0.4886 -19.425 % ±25.000 % 5.575 % within

L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %

80 rows, 14 of 80 outside the tolerance.

Chart: L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %; L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %; L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %; L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %.

Model minus measurement per case with the tolerance band L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 % tolerance ±25 % -25 0 25 50 75 model / measured − 1 [%]; shaded: tolerance Sn 0.130 Re 500 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(30): measured 0.02468, model 0.03565, error 44.440 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(30): measured 0.02468, model 0.04193, error 69.876 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(30): measured 0.02468, model 0.03979, error 61.203 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(30): measured 0.02468, model 0.0415, error 68.134 %, tolerance ±25 % Sn 0.130 Re 500 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(45): measured 0.0285, model 0.03439, error 20.668 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(45): measured 0.0285, model 0.04045, error 41.918 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(45): measured 0.0285, model 0.03839, error 34.673 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(45): measured 0.0285, model 0.04004, error 40.463 %, tolerance ±25 % Sn 0.130 Re 500 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(60): measured 0.02468, model 0.03017, error 22.237 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(60): measured 0.02468, model 0.03549, error 43.763 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(60): measured 0.02468, model 0.03368, error 36.423 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(60): measured 0.02468, model 0.03512, error 42.289 %, tolerance ±25 % Sn 0.130 Re 500 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(80): measured 0.009749, model 0.01409, error 44.556 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(80): measured 0.009749, model 0.01657, error 70.013 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(80): measured 0.009749, model 0.01573, error 61.333 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(80): measured 0.009749, model 0.0164, error 68.269 %, tolerance ±25 % Sn 0.130 Re 1000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(30): measured 0.02468, model 0.03108, error 25.908 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(30): measured 0.02468, model 0.03656, error 48.122 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(30): measured 0.02468, model 0.03465, error 40.389 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(30): measured 0.02468, model 0.03616, error 46.500 %, tolerance ±25 % Sn 0.130 Re 1000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(45): measured 0.0285, model 0.02998, error 5.186 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(45): measured 0.0285, model 0.03527, error 23.744 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(45): measured 0.0285, model 0.03343, error 17.284 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(45): measured 0.0285, model 0.03488, error 22.389 %, tolerance ±25 % Sn 0.130 Re 1000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(60): measured 0.02468, model 0.0263, error 6.554 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(60): measured 0.02468, model 0.03094, error 25.353 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(60): measured 0.02468, model 0.02933, error 18.809 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(60): measured 0.02468, model 0.0306, error 23.980 %, tolerance ±25 % Sn 0.130 Re 1000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(80): measured 0.009749, model 0.01228, error 26.009 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(80): measured 0.009749, model 0.01445, error 48.242 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(80): measured 0.009749, model 0.0137, error 40.502 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(80): measured 0.009749, model 0.01429, error 46.618 %, tolerance ±25 % Sn 0.130 Re 2000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(30): measured 0.02468, model 0.02917, error 18.161 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(30): measured 0.02468, model 0.0344, error 39.356 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(30): measured 0.02468, model 0.03251, error 31.699 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(30): measured 0.02468, model 0.03407, error 38.019 %, tolerance ±25 % Sn 0.130 Re 2000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(45): measured 0.0285, model 0.02814, error -1.286 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(45): measured 0.0285, model 0.03318, error 16.421 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(45): measured 0.0285, model 0.03136, error 10.024 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(45): measured 0.0285, model 0.03287, error 15.304 %, tolerance ±25 % Sn 0.130 Re 2000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(60): measured 0.02468, model 0.02468, error -0.003 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(60): measured 0.02468, model 0.02911, error 17.935 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(60): measured 0.02468, model 0.02751, error 11.455 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(60): measured 0.02468, model 0.02883, error 16.803 %, tolerance ±25 % Sn 0.130 Re 2000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(80): measured 0.009749, model 0.01153, error 18.256 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(80): measured 0.009749, model 0.0136, error 39.469 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(80): measured 0.009749, model 0.01285, error 31.805 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(80): measured 0.009749, model 0.01347, error 38.130 %, tolerance ±25 % Sn 0.130 Re 5000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(30): measured 0.02468, model 0.03185, error 29.039 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(30): measured 0.02468, model 0.03763, error 52.431 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(30): measured 0.02468, model 0.03552, error 43.903 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(30): measured 0.02468, model 0.03733, error 51.214 %, tolerance ±25 % Sn 0.130 Re 5000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(45): measured 0.0285, model 0.03073, error 7.802 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(45): measured 0.0285, model 0.0363, error 27.344 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(45): measured 0.0285, model 0.03427, error 20.220 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(45): measured 0.0285, model 0.03601, error 26.327 %, tolerance ±25 % Sn 0.130 Re 5000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(60): measured 0.02468, model 0.02696, error 9.204 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(60): measured 0.02468, model 0.03184, error 28.999 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(60): measured 0.02468, model 0.03006, error 21.783 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(60): measured 0.02468, model 0.03159, error 27.970 %, tolerance ±25 % Sn 0.130 Re 5000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(80): measured 0.009749, model 0.01259, error 29.143 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(80): measured 0.009749, model 0.01487, error 52.554 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(80): measured 0.009749, model 0.01404, error 44.019 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(80): measured 0.009749, model 0.01475, error 51.336 %, tolerance ±25 % Sn 0.130 Re 10000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(30): measured 0.02468, model 0.0336, error 36.111 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(30): measured 0.02468, model 0.03963, error 60.564 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(30): measured 0.02468, model 0.03748, error 51.844 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(30): measured 0.02468, model 0.03929, error 59.187 %, tolerance ±25 % Sn 0.130 Re 10000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(45): measured 0.0285, model 0.03241, error 13.710 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(45): measured 0.0285, model 0.03823, error 34.139 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(45): measured 0.0285, model 0.03616, error 26.854 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(45): measured 0.0285, model 0.03791, error 32.988 %, tolerance ±25 % Sn 0.130 Re 10000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(60): measured 0.02468, model 0.02843, error 15.189 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(60): measured 0.02468, model 0.03354, error 35.883 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(60): measured 0.02468, model 0.03172, error 28.503 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(60): measured 0.02468, model 0.03325, error 34.717 %, tolerance ±25 % Sn 0.130 Re 10000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(80): measured 0.009749, model 0.01328, error 36.221 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(80): measured 0.009749, model 0.01567, error 60.694 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(80): measured 0.009749, model 0.01481, error 51.967 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(80): measured 0.009749, model 0.01553, error 59.315 %, tolerance ±25 % Sn 0.144 Re 500 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(30): measured 0.03052, model 0.03998, error 31.023 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(30): measured 0.03052, model 0.04712, error 54.420 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(30): measured 0.03052, model 0.04467, error 46.375 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(30): measured 0.03052, model 0.04718, error 54.603 %, tolerance ±25 % Sn 0.144 Re 500 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(45): measured 0.03524, model 0.03857, error 9.459 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(45): measured 0.03524, model 0.04546, error 29.006 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(45): measured 0.03524, model 0.04309, error 22.285 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(45): measured 0.03524, model 0.04551, error 29.159 %, tolerance ±25 % Sn 0.144 Re 500 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(60): measured 0.03052, model 0.03384, error 10.882 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(60): measured 0.03052, model 0.03988, error 30.683 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(60): measured 0.03052, model 0.0378, error 23.875 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(60): measured 0.03052, model 0.03993, error 30.838 %, tolerance ±25 % Sn 0.144 Re 500 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(80): measured 0.01205, model 0.0158, error 31.129 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(80): measured 0.01205, model 0.01863, error 54.545 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(80): measured 0.01205, model 0.01766, error 46.493 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(80): measured 0.01205, model 0.01865, error 54.728 %, tolerance ±25 % Sn 0.144 Re 1000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(30): measured 0.03052, model 0.03485, error 14.198 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(30): measured 0.03052, model 0.04108, error 34.631 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(30): measured 0.03052, model 0.03889, error 27.444 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(30): measured 0.03052, model 0.0411, error 34.693 %, tolerance ±25 % Sn 0.144 Re 1000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(45): measured 0.03524, model 0.03362, error -4.596 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(45): measured 0.03524, model 0.03963, error 12.474 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(45): measured 0.03524, model 0.03752, error 6.469 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(45): measured 0.03524, model 0.03965, error 12.526 %, tolerance ±25 % Sn 0.144 Re 1000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(60): measured 0.03052, model 0.02949, error -3.356 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(60): measured 0.03052, model 0.03477, error 13.936 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(60): measured 0.03052, model 0.03291, error 7.853 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(60): measured 0.03052, model 0.03479, error 13.989 %, tolerance ±25 % Sn 0.144 Re 1000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(80): measured 0.01205, model 0.01377, error 14.291 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(80): measured 0.01205, model 0.01624, error 34.740 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(80): measured 0.01205, model 0.01537, error 27.547 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(80): measured 0.01205, model 0.01625, error 34.802 %, tolerance ±25 % Sn 0.144 Re 2000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(30): measured 0.03052, model 0.03266, error 7.037 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(30): measured 0.03052, model 0.03862, error 26.547 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(30): measured 0.03052, model 0.03644, error 19.398 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(30): measured 0.03052, model 0.03872, error 26.890 %, tolerance ±25 % Sn 0.144 Re 2000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(45): measured 0.03524, model 0.03151, error -10.579 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(45): measured 0.03524, model 0.03725, error 5.720 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(45): measured 0.03524, model 0.03515, error -0.252 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(45): measured 0.03524, model 0.03735, error 6.007 %, tolerance ±25 % Sn 0.144 Re 2000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(60): measured 0.03052, model 0.02764, error -9.416 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(60): measured 0.03052, model 0.03268, error 7.094 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(60): measured 0.03052, model 0.03084, error 1.044 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(60): measured 0.03052, model 0.03277, error 7.385 %, tolerance ±25 % Sn 0.144 Re 2000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(80): measured 0.01205, model 0.01291, error 7.124 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(80): measured 0.01205, model 0.01526, error 26.649 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(80): measured 0.01205, model 0.0144, error 19.494 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(80): measured 0.01205, model 0.01531, error 26.992 %, tolerance ±25 % Sn 0.144 Re 5000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(30): measured 0.03052, model 0.03564, error 16.794 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(30): measured 0.03052, model 0.04222, error 38.338 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(30): measured 0.03052, model 0.03978, error 30.362 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(30): measured 0.03052, model 0.04243, error 39.032 %, tolerance ±25 % Sn 0.144 Re 5000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(45): measured 0.03524, model 0.03438, error -2.428 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(45): measured 0.03524, model 0.04072, error 15.571 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(45): measured 0.03524, model 0.03838, error 8.907 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(45): measured 0.03524, model 0.04093, error 16.150 %, tolerance ±25 % Sn 0.144 Re 5000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(60): measured 0.03052, model 0.03016, error -1.159 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(60): measured 0.03052, model 0.03573, error 17.073 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(60): measured 0.03052, model 0.03367, error 10.323 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(60): measured 0.03052, model 0.03591, error 17.660 %, tolerance ±25 % Sn 0.144 Re 5000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(80): measured 0.01205, model 0.01409, error 16.888 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(80): measured 0.01205, model 0.01669, error 38.450 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(80): measured 0.01205, model 0.01572, error 30.467 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(80): measured 0.01205, model 0.01677, error 39.144 %, tolerance ±25 % Sn 0.144 Re 10000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(30): measured 0.03052, model 0.03762, error 23.280 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(30): measured 0.03052, model 0.04449, error 45.794 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(30): measured 0.03052, model 0.04201, error 37.658 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(30): measured 0.03052, model 0.04467, error 46.369 %, tolerance ±25 % Sn 0.144 Re 10000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(45): measured 0.03524, model 0.03629, error 2.991 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(45): measured 0.03524, model 0.04292, error 21.799 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(45): measured 0.03524, model 0.04052, error 15.003 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(45): measured 0.03524, model 0.04309, error 22.280 %, tolerance ±25 % Sn 0.144 Re 10000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(60): measured 0.03052, model 0.03184, error 4.330 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(60): measured 0.03052, model 0.03765, error 23.383 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(60): measured 0.03052, model 0.03555, error 16.498 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(60): measured 0.03052, model 0.0378, error 23.869 %, tolerance ±25 % Sn 0.144 Re 10000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(80): measured 0.01205, model 0.01487, error 23.380 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(80): measured 0.01205, model 0.01759, error 45.911 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(80): measured 0.01205, model 0.0166, error 37.769 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(80): measured 0.01205, model 0.01765, error 46.487 %, tolerance ±25 % Sn 0.184 Re 500 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(30): measured 0.04997, model 0.05341, error 6.873 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(30): measured 0.04997, model 0.06757, error 35.219 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(30): measured 0.04997, model 0.05944, error 18.934 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(30): measured 0.04997, model 0.06511, error 30.287 %, tolerance ±25 % Sn 0.184 Re 500 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(45): measured 0.0577, model 0.05152, error -10.716 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(45): measured 0.0577, model 0.06519, error 12.965 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(45): measured 0.0577, model 0.05734, error -0.640 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(45): measured 0.0577, model 0.06281, error 8.845 %, tolerance ±25 % Sn 0.184 Re 500 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(60): measured 0.04997, model 0.0452, error -9.555 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(60): measured 0.04997, model 0.05719, error 14.433 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(60): measured 0.04997, model 0.0503, error 0.652 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(60): measured 0.04997, model 0.0551, error 10.260 %, tolerance ±25 % Sn 0.184 Re 500 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(80): measured 0.01974, model 0.02111, error 6.959 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(80): measured 0.01974, model 0.02671, error 35.328 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(80): measured 0.01974, model 0.02349, error 19.030 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(80): measured 0.01974, model 0.02573, error 30.392 %, tolerance ±25 % Sn 0.184 Re 1000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(30): measured 0.04997, model 0.04654, error -6.877 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(30): measured 0.04997, model 0.0589, error 17.858 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(30): measured 0.04997, model 0.05171, error 3.482 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(30): measured 0.04997, model 0.0567, error 13.466 %, tolerance ±25 % Sn 0.184 Re 1000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(45): measured 0.0577, model 0.04489, error -22.203 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(45): measured 0.0577, model 0.05682, error -1.539 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(45): measured 0.0577, model 0.04989, error -13.549 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(45): measured 0.0577, model 0.0547, error -5.208 %, tolerance ±25 % Sn 0.184 Re 1000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(60): measured 0.04997, model 0.03938, error -21.192 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(60): measured 0.04997, model 0.04984, error -0.259 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(60): measured 0.04997, model 0.04376, error -12.425 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(60): measured 0.04997, model 0.04799, error -3.976 %, tolerance ±25 % Sn 0.184 Re 1000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(80): measured 0.01974, model 0.01839, error -6.802 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(80): measured 0.01974, model 0.02328, error 17.953 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(80): measured 0.01974, model 0.02044, error 3.565 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(80): measured 0.01974, model 0.02241, error 13.558 %, tolerance ±25 % Sn 0.184 Re 2000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(30): measured 0.04997, model 0.04346, error -13.030 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(30): measured 0.04997, model 0.05522, error 10.496 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(30): measured 0.04997, model 0.04827, error -3.418 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(30): measured 0.04997, model 0.05341, error 6.876 %, tolerance ±25 % Sn 0.184 Re 2000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(45): measured 0.0577, model 0.04193, error -27.343 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(45): measured 0.0577, model 0.05327, error -7.689 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(45): measured 0.0577, model 0.04656, error -19.314 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(45): measured 0.0577, model 0.05152, error -10.713 %, tolerance ±25 % Sn 0.184 Re 2000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(60): measured 0.04997, model 0.03678, error -26.399 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(60): measured 0.04997, model 0.04673, error -6.489 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(60): measured 0.04997, model 0.04085, error -18.265 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(60): measured 0.04997, model 0.0452, error -9.552 %, tolerance ±25 % Sn 0.184 Re 2000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(80): measured 0.01974, model 0.01718, error -12.960 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(80): measured 0.01974, model 0.02183, error 10.585 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(80): measured 0.01974, model 0.01908, error -3.341 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(80): measured 0.01974, model 0.02111, error 6.963 %, tolerance ±25 % Sn 0.184 Re 5000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(30): measured 0.04997, model 0.0473, error -5.342 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(30): measured 0.04997, model 0.06026, error 20.588 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(30): measured 0.04997, model 0.05258, error 5.205 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(30): measured 0.04997, model 0.05853, error 17.130 %, tolerance ±25 % Sn 0.184 Re 5000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(45): measured 0.0577, model 0.04563, error -20.920 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(45): measured 0.0577, model 0.05813, error 0.742 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(45): measured 0.0577, model 0.05072, error -12.109 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(45): measured 0.0577, model 0.05647, error -2.147 %, tolerance ±25 % Sn 0.184 Re 5000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(60): measured 0.04997, model 0.04003, error -19.892 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(60): measured 0.04997, model 0.051, error 2.052 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(60): measured 0.04997, model 0.04449, error -10.967 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(60): measured 0.04997, model 0.04954, error -0.875 %, tolerance ±25 % Sn 0.184 Re 5000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(80): measured 0.01974, model 0.0187, error -5.265 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(80): measured 0.01974, model 0.02382, error 20.686 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(80): measured 0.01974, model 0.02078, error 5.290 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(80): measured 0.01974, model 0.02314, error 17.225 %, tolerance ±25 % Sn 0.184 Re 10000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(30): measured 0.04997, model 0.05003, error 0.115 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(30): measured 0.04997, model 0.0636, error 27.267 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(30): measured 0.04997, model 0.05564, error 11.334 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(30): measured 0.04997, model 0.06163, error 23.329 %, tolerance ±25 % Sn 0.184 Re 10000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(45): measured 0.0577, model 0.04826, error -16.361 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(45): measured 0.0577, model 0.06135, error 6.322 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(45): measured 0.0577, model 0.05367, error -6.989 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(45): measured 0.0577, model 0.05945, error 3.032 %, tolerance ±25 % Sn 0.184 Re 10000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(60): measured 0.04997, model 0.04234, error -15.274 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(60): measured 0.04997, model 0.05382, error 7.704 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(60): measured 0.04997, model 0.04709, error -5.780 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(60): measured 0.04997, model 0.05216, error 4.371 %, tolerance ±25 % Sn 0.184 Re 10000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(80): measured 0.01974, model 0.01977, error 0.196 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(80): measured 0.01974, model 0.02514, error 27.370 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(80): measured 0.01974, model 0.02199, error 11.424 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(80): measured 0.01974, model 0.02436, error 23.428 %, tolerance ±25 % Sn 0.317 Re 500 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(30): measured 0.1379, model 0.1468, error 6.503 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(30): measured 0.1379, model 0.1974, error 43.174 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(30): measured 0.1379, model 0.121, error -12.267 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(30): measured 0.1379, model 0.1505, error 9.121 %, tolerance ±25 % Sn 0.317 Re 500 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(45): measured 0.1592, model 0.1417, error -11.025 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(45): measured 0.1592, model 0.1904, error 19.610 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(45): measured 0.1592, model 0.1167, error -26.706 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(45): measured 0.1592, model 0.1451, error -8.838 %, tolerance ±25 % Sn 0.317 Re 500 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(60): measured 0.1379, model 0.1243, error -9.868 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(60): measured 0.1379, model 0.1671, error 21.165 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(60): measured 0.1379, model 0.1024, error -25.753 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(60): measured 0.1379, model 0.1273, error -7.653 %, tolerance ±25 % Sn 0.317 Re 500 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(80): measured 0.05445, model 0.05804, error 6.589 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(80): measured 0.05445, model 0.07803, error 43.289 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(80): measured 0.05445, model 0.04781, error -12.196 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(80): measured 0.05445, model 0.05947, error 9.209 %, tolerance ±25 % Sn 0.317 Re 1000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(30): measured 0.1379, model 0.1279, error -7.221 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(30): measured 0.1379, model 0.172, error 24.728 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(30): measured 0.1379, model 0.105, error -23.814 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(30): measured 0.1379, model 0.1308, error -5.125 %, tolerance ±25 % Sn 0.317 Re 1000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(45): measured 0.1592, model 0.1234, error -22.490 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(45): measured 0.1592, model 0.1659, error 4.201 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(45): measured 0.1592, model 0.1013, error -36.352 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(45): measured 0.1592, model 0.1262, error -20.739 %, tolerance ±25 % Sn 0.317 Re 1000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(60): measured 0.1379, model 0.1083, error -21.482 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(60): measured 0.1379, model 0.1455, error 5.555 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(60): measured 0.1379, model 0.0889, error -35.525 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(60): measured 0.1379, model 0.1107, error -19.709 %, tolerance ±25 % Sn 0.317 Re 1000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(80): measured 0.05445, model 0.05056, error -7.146 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(80): measured 0.05445, model 0.06797, error 24.829 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(80): measured 0.05445, model 0.04152, error -23.752 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(80): measured 0.05445, model 0.0517, error -5.048 %, tolerance ±25 % Sn 0.317 Re 2000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(30): measured 0.1379, model 0.118, error -14.386 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(30): measured 0.1379, model 0.16, error 16.055 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(30): measured 0.1379, model 0.09677, error -29.815 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(30): measured 0.1379, model 0.1231, error -10.694 %, tolerance ±25 % Sn 0.317 Re 2000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(45): measured 0.1592, model 0.1139, error -28.476 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(45): measured 0.1592, model 0.1544, error -3.045 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(45): measured 0.1592, model 0.09335, error -41.366 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(45): measured 0.1592, model 0.1188, error -25.391 %, tolerance ±25 % Sn 0.317 Re 2000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(60): measured 0.1379, model 0.0999, error -27.546 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(60): measured 0.1379, model 0.1354, error -1.784 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(60): measured 0.1379, model 0.0819, error -40.604 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(60): measured 0.1379, model 0.1042, error -24.422 %, tolerance ±25 % Sn 0.317 Re 2000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(80): measured 0.05445, model 0.04666, error -14.317 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(80): measured 0.05445, model 0.06325, error 16.149 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(80): measured 0.05445, model 0.03825, error -29.759 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(80): measured 0.05445, model 0.04867, error -10.622 %, tolerance ±25 % Sn 0.317 Re 5000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(30): measured 0.1379, model 0.1272, error -7.737 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(30): measured 0.1379, model 0.1737, error 25.960 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(30): measured 0.1379, model 0.1044, error -24.247 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(30): measured 0.1379, model 0.1351, error -2.026 %, tolerance ±25 % Sn 0.317 Re 5000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(45): measured 0.1592, model 0.1227, error -22.922 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(45): measured 0.1592, model 0.1675, error 5.230 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(45): measured 0.1592, model 0.1008, error -36.714 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(45): measured 0.1592, model 0.1303, error -18.150 %, tolerance ±25 % Sn 0.317 Re 5000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(60): measured 0.1379, model 0.1077, error -21.919 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(60): measured 0.1379, model 0.147, error 6.598 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(60): measured 0.1379, model 0.08839, error -35.892 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(60): measured 0.1379, model 0.1143, error -17.086 %, tolerance ±25 % Sn 0.317 Re 5000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(80): measured 0.05445, model 0.05028, error -7.663 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(80): measured 0.05445, model 0.06864, error 26.061 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(80): measured 0.05445, model 0.04128, error -24.186 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(80): measured 0.05445, model 0.05339, error -1.946 %, tolerance ±25 % Sn 0.317 Re 10000 CL(30) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(30): measured 0.1379, model 0.1355, error -1.754 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(30): measured 0.1379, model 0.1841, error 33.500 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(30): measured 0.1379, model 0.1114, error -19.222 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(30): measured 0.1379, model 0.1423, error 3.222 %, tolerance ±25 % Sn 0.317 Re 10000 CL(45) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(45): measured 0.1592, model 0.1307, error -17.923 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(45): measured 0.1592, model 0.1776, error 11.528 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(45): measured 0.1592, model 0.1074, error -32.516 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(45): measured 0.1592, model 0.1373, error -13.766 %, tolerance ±25 % Sn 0.317 Re 10000 CL(60) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(60): measured 0.1379, model 0.1146, error -16.856 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(60): measured 0.1379, model 0.1558, error 12.978 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(60): measured 0.1379, model 0.09426, error -31.639 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(60): measured 0.1379, model 0.1204, error -12.645 %, tolerance ±25 % Sn 0.317 Re 10000 CL(80) L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.00, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(80): measured 0.05445, model 0.05354, error -1.674 %, tolerance ±25 % L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(80): measured 0.05445, model 0.07275, error 33.607 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(80): measured 0.05445, model 0.04402, error -19.157 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(80): measured 0.05445, model 0.05625, error 3.306 %, tolerance ±25 %

Case Measured Model Error Tolerance Margin Result
Sn 0.130 Re 500 CL(30) 0.02468 0.03565 44.440 % ±25.000 % -19.440 % outside
Sn 0.130 Re 500 CL(45) 0.0285 0.03439 20.668 % ±25.000 % 4.332 % within
Sn 0.130 Re 500 CL(60) 0.02468 0.03017 22.237 % ±25.000 % 2.763 % within
Sn 0.130 Re 500 CL(80) 0.009749 0.01409 44.556 % ±25.000 % -19.556 % outside
Sn 0.130 Re 1000 CL(30) 0.02468 0.03108 25.908 % ±25.000 % -0.908 % outside
Sn 0.130 Re 1000 CL(45) 0.0285 0.02998 5.186 % ±25.000 % 19.814 % within
Sn 0.130 Re 1000 CL(60) 0.02468 0.0263 6.554 % ±25.000 % 18.446 % within
Sn 0.130 Re 1000 CL(80) 0.009749 0.01228 26.009 % ±25.000 % -1.009 % outside
Sn 0.130 Re 2000 CL(30) 0.02468 0.02917 18.161 % ±25.000 % 6.839 % within
Sn 0.130 Re 2000 CL(45) 0.0285 0.02814 -1.286 % ±25.000 % 23.714 % within
Sn 0.130 Re 2000 CL(60) 0.02468 0.02468 -0.003 % ±25.000 % 24.997 % within
Sn 0.130 Re 2000 CL(80) 0.009749 0.01153 18.256 % ±25.000 % 6.744 % within
Sn 0.130 Re 5000 CL(30) 0.02468 0.03185 29.039 % ±25.000 % -4.039 % outside
Sn 0.130 Re 5000 CL(45) 0.0285 0.03073 7.802 % ±25.000 % 17.198 % within
Sn 0.130 Re 5000 CL(60) 0.02468 0.02696 9.204 % ±25.000 % 15.796 % within
Sn 0.130 Re 5000 CL(80) 0.009749 0.01259 29.143 % ±25.000 % -4.143 % outside
Sn 0.130 Re 10000 CL(30) 0.02468 0.0336 36.111 % ±25.000 % -11.111 % outside
Sn 0.130 Re 10000 CL(45) 0.0285 0.03241 13.710 % ±25.000 % 11.290 % within
Sn 0.130 Re 10000 CL(60) 0.02468 0.02843 15.189 % ±25.000 % 9.811 % within
Sn 0.130 Re 10000 CL(80) 0.009749 0.01328 36.221 % ±25.000 % -11.221 % outside
Sn 0.144 Re 500 CL(30) 0.03052 0.03998 31.023 % ±25.000 % -6.023 % outside
Sn 0.144 Re 500 CL(45) 0.03524 0.03857 9.459 % ±25.000 % 15.541 % within
Sn 0.144 Re 500 CL(60) 0.03052 0.03384 10.882 % ±25.000 % 14.118 % within
Sn 0.144 Re 500 CL(80) 0.01205 0.0158 31.129 % ±25.000 % -6.129 % outside
Sn 0.144 Re 1000 CL(30) 0.03052 0.03485 14.198 % ±25.000 % 10.802 % within
Sn 0.144 Re 1000 CL(45) 0.03524 0.03362 -4.596 % ±25.000 % 20.404 % within
Sn 0.144 Re 1000 CL(60) 0.03052 0.02949 -3.356 % ±25.000 % 21.644 % within
Sn 0.144 Re 1000 CL(80) 0.01205 0.01377 14.291 % ±25.000 % 10.709 % within
Sn 0.144 Re 2000 CL(30) 0.03052 0.03266 7.037 % ±25.000 % 17.963 % within
Sn 0.144 Re 2000 CL(45) 0.03524 0.03151 -10.579 % ±25.000 % 14.421 % within
Sn 0.144 Re 2000 CL(60) 0.03052 0.02764 -9.416 % ±25.000 % 15.584 % within
Sn 0.144 Re 2000 CL(80) 0.01205 0.01291 7.124 % ±25.000 % 17.876 % within
Sn 0.144 Re 5000 CL(30) 0.03052 0.03564 16.794 % ±25.000 % 8.206 % within
Sn 0.144 Re 5000 CL(45) 0.03524 0.03438 -2.428 % ±25.000 % 22.572 % within
Sn 0.144 Re 5000 CL(60) 0.03052 0.03016 -1.159 % ±25.000 % 23.841 % within
Sn 0.144 Re 5000 CL(80) 0.01205 0.01409 16.888 % ±25.000 % 8.112 % within
Sn 0.144 Re 10000 CL(30) 0.03052 0.03762 23.280 % ±25.000 % 1.720 % within
Sn 0.144 Re 10000 CL(45) 0.03524 0.03629 2.991 % ±25.000 % 22.009 % within
Sn 0.144 Re 10000 CL(60) 0.03052 0.03184 4.330 % ±25.000 % 20.670 % within
Sn 0.144 Re 10000 CL(80) 0.01205 0.01487 23.380 % ±25.000 % 1.620 % within
Sn 0.184 Re 500 CL(30) 0.04997 0.05341 6.873 % ±25.000 % 18.127 % within
Sn 0.184 Re 500 CL(45) 0.0577 0.05152 -10.716 % ±25.000 % 14.284 % within
Sn 0.184 Re 500 CL(60) 0.04997 0.0452 -9.555 % ±25.000 % 15.445 % within
Sn 0.184 Re 500 CL(80) 0.01974 0.02111 6.959 % ±25.000 % 18.041 % within
Sn 0.184 Re 1000 CL(30) 0.04997 0.04654 -6.877 % ±25.000 % 18.123 % within
Sn 0.184 Re 1000 CL(45) 0.0577 0.04489 -22.203 % ±25.000 % 2.797 % within
Sn 0.184 Re 1000 CL(60) 0.04997 0.03938 -21.192 % ±25.000 % 3.808 % within
Sn 0.184 Re 1000 CL(80) 0.01974 0.01839 -6.802 % ±25.000 % 18.198 % within
Sn 0.184 Re 2000 CL(30) 0.04997 0.04346 -13.030 % ±25.000 % 11.970 % within
Sn 0.184 Re 2000 CL(45) 0.0577 0.04193 -27.343 % ±25.000 % -2.343 % outside
Sn 0.184 Re 2000 CL(60) 0.04997 0.03678 -26.399 % ±25.000 % -1.399 % outside
Sn 0.184 Re 2000 CL(80) 0.01974 0.01718 -12.960 % ±25.000 % 12.040 % within
Sn 0.184 Re 5000 CL(30) 0.04997 0.0473 -5.342 % ±25.000 % 19.658 % within
Sn 0.184 Re 5000 CL(45) 0.0577 0.04563 -20.920 % ±25.000 % 4.080 % within
Sn 0.184 Re 5000 CL(60) 0.04997 0.04003 -19.892 % ±25.000 % 5.108 % within
Sn 0.184 Re 5000 CL(80) 0.01974 0.0187 -5.265 % ±25.000 % 19.735 % within
Sn 0.184 Re 10000 CL(30) 0.04997 0.05003 0.115 % ±25.000 % 24.885 % within
Sn 0.184 Re 10000 CL(45) 0.0577 0.04826 -16.361 % ±25.000 % 8.639 % within
Sn 0.184 Re 10000 CL(60) 0.04997 0.04234 -15.274 % ±25.000 % 9.726 % within
Sn 0.184 Re 10000 CL(80) 0.01974 0.01977 0.196 % ±25.000 % 24.804 % within
Sn 0.317 Re 500 CL(30) 0.1379 0.1468 6.503 % ±25.000 % 18.497 % within
Sn 0.317 Re 500 CL(45) 0.1592 0.1417 -11.025 % ±25.000 % 13.975 % within
Sn 0.317 Re 500 CL(60) 0.1379 0.1243 -9.868 % ±25.000 % 15.132 % within
Sn 0.317 Re 500 CL(80) 0.05445 0.05804 6.589 % ±25.000 % 18.411 % within
Sn 0.317 Re 1000 CL(30) 0.1379 0.1279 -7.221 % ±25.000 % 17.779 % within
Sn 0.317 Re 1000 CL(45) 0.1592 0.1234 -22.490 % ±25.000 % 2.510 % within
Sn 0.317 Re 1000 CL(60) 0.1379 0.1083 -21.482 % ±25.000 % 3.518 % within
Sn 0.317 Re 1000 CL(80) 0.05445 0.05056 -7.146 % ±25.000 % 17.854 % within
Sn 0.317 Re 2000 CL(30) 0.1379 0.118 -14.386 % ±25.000 % 10.614 % within
Sn 0.317 Re 2000 CL(45) 0.1592 0.1139 -28.476 % ±25.000 % -3.476 % outside
Sn 0.317 Re 2000 CL(60) 0.1379 0.0999 -27.546 % ±25.000 % -2.546 % outside
Sn 0.317 Re 2000 CL(80) 0.05445 0.04666 -14.317 % ±25.000 % 10.683 % within
Sn 0.317 Re 5000 CL(30) 0.1379 0.1272 -7.737 % ±25.000 % 17.263 % within
Sn 0.317 Re 5000 CL(45) 0.1592 0.1227 -22.922 % ±25.000 % 2.078 % within
Sn 0.317 Re 5000 CL(60) 0.1379 0.1077 -21.919 % ±25.000 % 3.081 % within
Sn 0.317 Re 5000 CL(80) 0.05445 0.05028 -7.663 % ±25.000 % 17.337 % within
Sn 0.317 Re 10000 CL(30) 0.1379 0.1355 -1.754 % ±25.000 % 23.246 % within
Sn 0.317 Re 10000 CL(45) 0.1592 0.1307 -17.923 % ±25.000 % 7.077 % within
Sn 0.317 Re 10000 CL(60) 0.1379 0.1146 -16.856 % ±25.000 % 8.144 % within
Sn 0.317 Re 10000 CL(80) 0.05445 0.05354 -1.674 % ±25.000 % 23.326 % within

L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_D(0), tolerance 25 %

20 rows, 6 of 20 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 Re 500 CD( 0) 0.1427 0.2087 46.254 % ±25.000 % -21.254 % outside
Sn 0.130 Re 1000 CD( 0) 0.1427 0.182 27.525 % ±25.000 % -2.525 % outside
Sn 0.130 Re 2000 CD( 0) 0.1427 0.1712 19.979 % ±25.000 % 5.021 % within
Sn 0.130 Re 5000 CD( 0) 0.1427 0.1873 31.235 % ±25.000 % -6.235 % outside
Sn 0.130 Re 10000 CD( 0) 0.1427 0.1973 38.237 % ±25.000 % -13.237 % outside
Sn 0.144 Re 500 CD( 0) 0.1686 0.2345 39.146 % ±25.000 % -14.146 % outside
Sn 0.144 Re 1000 CD( 0) 0.1686 0.2045 21.314 % ±25.000 % 3.686 % within
Sn 0.144 Re 2000 CD( 0) 0.1686 0.1922 14.029 % ±25.000 % 10.971 % within
Sn 0.144 Re 5000 CD( 0) 0.1686 0.2101 24.655 % ±25.000 % 0.345 % within
Sn 0.144 Re 10000 CD( 0) 0.1686 0.2214 31.372 % ±25.000 % -6.372 % outside
Sn 0.184 Re 500 CD( 0) 0.2517 0.3133 24.438 % ±25.000 % 0.562 % within
Sn 0.184 Re 1000 CD( 0) 0.2517 0.273 8.462 % ±25.000 % 16.538 % within
Sn 0.184 Re 2000 CD( 0) 0.2517 0.256 1.686 % ±25.000 % 23.314 % within
Sn 0.184 Re 5000 CD( 0) 0.2517 0.2794 10.974 % ±25.000 % 14.026 % within
Sn 0.184 Re 10000 CD( 0) 0.2517 0.2948 17.121 % ±25.000 % 7.879 % within
Sn 0.317 Re 500 CD( 0) 0.6064 0.6513 7.409 % ±25.000 % 17.591 % within
Sn 0.317 Re 1000 CD( 0) 0.6064 0.5674 -6.428 % ±25.000 % 18.572 % within
Sn 0.317 Re 2000 CD( 0) 0.6064 0.5279 -12.935 % ±25.000 % 12.065 % within
Sn 0.317 Re 5000 CD( 0) 0.6064 0.573 -5.505 % ±25.000 % 19.495 % within
Sn 0.317 Re 10000 CD( 0) 0.6064 0.6073 0.152 % ±25.000 % 24.848 % within

L6 default law LocalThroughFlow (c_l from MF2022 Eq. 10, MARE-0110), K = 1.16, C_L(theta), tolerance 25 %

80 rows, 39 of 80 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 Re 500 CL(30) 0.02468 0.04193 69.876 % ±25.000 % -44.876 % outside
Sn 0.130 Re 500 CL(45) 0.0285 0.04045 41.918 % ±25.000 % -16.918 % outside
Sn 0.130 Re 500 CL(60) 0.02468 0.03549 43.763 % ±25.000 % -18.763 % outside
Sn 0.130 Re 500 CL(80) 0.009749 0.01657 70.013 % ±25.000 % -45.013 % outside
Sn 0.130 Re 1000 CL(30) 0.02468 0.03656 48.122 % ±25.000 % -23.122 % outside
Sn 0.130 Re 1000 CL(45) 0.0285 0.03527 23.744 % ±25.000 % 1.256 % within
Sn 0.130 Re 1000 CL(60) 0.02468 0.03094 25.353 % ±25.000 % -0.353 % outside
Sn 0.130 Re 1000 CL(80) 0.009749 0.01445 48.242 % ±25.000 % -23.242 % outside
Sn 0.130 Re 2000 CL(30) 0.02468 0.0344 39.356 % ±25.000 % -14.356 % outside
Sn 0.130 Re 2000 CL(45) 0.0285 0.03318 16.421 % ±25.000 % 8.579 % within
Sn 0.130 Re 2000 CL(60) 0.02468 0.02911 17.935 % ±25.000 % 7.065 % within
Sn 0.130 Re 2000 CL(80) 0.009749 0.0136 39.469 % ±25.000 % -14.469 % outside
Sn 0.130 Re 5000 CL(30) 0.02468 0.03763 52.431 % ±25.000 % -27.431 % outside
Sn 0.130 Re 5000 CL(45) 0.0285 0.0363 27.344 % ±25.000 % -2.344 % outside
Sn 0.130 Re 5000 CL(60) 0.02468 0.03184 28.999 % ±25.000 % -3.999 % outside
Sn 0.130 Re 5000 CL(80) 0.009749 0.01487 52.554 % ±25.000 % -27.554 % outside
Sn 0.130 Re 10000 CL(30) 0.02468 0.03963 60.564 % ±25.000 % -35.564 % outside
Sn 0.130 Re 10000 CL(45) 0.0285 0.03823 34.139 % ±25.000 % -9.139 % outside
Sn 0.130 Re 10000 CL(60) 0.02468 0.03354 35.883 % ±25.000 % -10.883 % outside
Sn 0.130 Re 10000 CL(80) 0.009749 0.01567 60.694 % ±25.000 % -35.694 % outside
Sn 0.144 Re 500 CL(30) 0.03052 0.04712 54.420 % ±25.000 % -29.420 % outside
Sn 0.144 Re 500 CL(45) 0.03524 0.04546 29.006 % ±25.000 % -4.006 % outside
Sn 0.144 Re 500 CL(60) 0.03052 0.03988 30.683 % ±25.000 % -5.683 % outside
Sn 0.144 Re 500 CL(80) 0.01205 0.01863 54.545 % ±25.000 % -29.545 % outside
Sn 0.144 Re 1000 CL(30) 0.03052 0.04108 34.631 % ±25.000 % -9.631 % outside
Sn 0.144 Re 1000 CL(45) 0.03524 0.03963 12.474 % ±25.000 % 12.526 % within
Sn 0.144 Re 1000 CL(60) 0.03052 0.03477 13.936 % ±25.000 % 11.064 % within
Sn 0.144 Re 1000 CL(80) 0.01205 0.01624 34.740 % ±25.000 % -9.740 % outside
Sn 0.144 Re 2000 CL(30) 0.03052 0.03862 26.547 % ±25.000 % -1.547 % outside
Sn 0.144 Re 2000 CL(45) 0.03524 0.03725 5.720 % ±25.000 % 19.280 % within
Sn 0.144 Re 2000 CL(60) 0.03052 0.03268 7.094 % ±25.000 % 17.906 % within
Sn 0.144 Re 2000 CL(80) 0.01205 0.01526 26.649 % ±25.000 % -1.649 % outside
Sn 0.144 Re 5000 CL(30) 0.03052 0.04222 38.338 % ±25.000 % -13.338 % outside
Sn 0.144 Re 5000 CL(45) 0.03524 0.04072 15.571 % ±25.000 % 9.429 % within
Sn 0.144 Re 5000 CL(60) 0.03052 0.03573 17.073 % ±25.000 % 7.927 % within
Sn 0.144 Re 5000 CL(80) 0.01205 0.01669 38.450 % ±25.000 % -13.450 % outside
Sn 0.144 Re 10000 CL(30) 0.03052 0.04449 45.794 % ±25.000 % -20.794 % outside
Sn 0.144 Re 10000 CL(45) 0.03524 0.04292 21.799 % ±25.000 % 3.201 % within
Sn 0.144 Re 10000 CL(60) 0.03052 0.03765 23.383 % ±25.000 % 1.617 % within
Sn 0.144 Re 10000 CL(80) 0.01205 0.01759 45.911 % ±25.000 % -20.911 % outside
Sn 0.184 Re 500 CL(30) 0.04997 0.06757 35.219 % ±25.000 % -10.219 % outside
Sn 0.184 Re 500 CL(45) 0.0577 0.06519 12.965 % ±25.000 % 12.035 % within
Sn 0.184 Re 500 CL(60) 0.04997 0.05719 14.433 % ±25.000 % 10.567 % within
Sn 0.184 Re 500 CL(80) 0.01974 0.02671 35.328 % ±25.000 % -10.328 % outside
Sn 0.184 Re 1000 CL(30) 0.04997 0.0589 17.858 % ±25.000 % 7.142 % within
Sn 0.184 Re 1000 CL(45) 0.0577 0.05682 -1.539 % ±25.000 % 23.461 % within
Sn 0.184 Re 1000 CL(60) 0.04997 0.04984 -0.259 % ±25.000 % 24.741 % within
Sn 0.184 Re 1000 CL(80) 0.01974 0.02328 17.953 % ±25.000 % 7.047 % within
Sn 0.184 Re 2000 CL(30) 0.04997 0.05522 10.496 % ±25.000 % 14.504 % within
Sn 0.184 Re 2000 CL(45) 0.0577 0.05327 -7.689 % ±25.000 % 17.311 % within
Sn 0.184 Re 2000 CL(60) 0.04997 0.04673 -6.489 % ±25.000 % 18.511 % within
Sn 0.184 Re 2000 CL(80) 0.01974 0.02183 10.585 % ±25.000 % 14.415 % within
Sn 0.184 Re 5000 CL(30) 0.04997 0.06026 20.588 % ±25.000 % 4.412 % within
Sn 0.184 Re 5000 CL(45) 0.0577 0.05813 0.742 % ±25.000 % 24.258 % within
Sn 0.184 Re 5000 CL(60) 0.04997 0.051 2.052 % ±25.000 % 22.948 % within
Sn 0.184 Re 5000 CL(80) 0.01974 0.02382 20.686 % ±25.000 % 4.314 % within
Sn 0.184 Re 10000 CL(30) 0.04997 0.0636 27.267 % ±25.000 % -2.267 % outside
Sn 0.184 Re 10000 CL(45) 0.0577 0.06135 6.322 % ±25.000 % 18.678 % within
Sn 0.184 Re 10000 CL(60) 0.04997 0.05382 7.704 % ±25.000 % 17.296 % within
Sn 0.184 Re 10000 CL(80) 0.01974 0.02514 27.370 % ±25.000 % -2.370 % outside
Sn 0.317 Re 500 CL(30) 0.1379 0.1974 43.174 % ±25.000 % -18.174 % outside
Sn 0.317 Re 500 CL(45) 0.1592 0.1904 19.610 % ±25.000 % 5.390 % within
Sn 0.317 Re 500 CL(60) 0.1379 0.1671 21.165 % ±25.000 % 3.835 % within
Sn 0.317 Re 500 CL(80) 0.05445 0.07803 43.289 % ±25.000 % -18.289 % outside
Sn 0.317 Re 1000 CL(30) 0.1379 0.172 24.728 % ±25.000 % 0.272 % within
Sn 0.317 Re 1000 CL(45) 0.1592 0.1659 4.201 % ±25.000 % 20.799 % within
Sn 0.317 Re 1000 CL(60) 0.1379 0.1455 5.555 % ±25.000 % 19.445 % within
Sn 0.317 Re 1000 CL(80) 0.05445 0.06797 24.829 % ±25.000 % 0.171 % within
Sn 0.317 Re 2000 CL(30) 0.1379 0.16 16.055 % ±25.000 % 8.945 % within
Sn 0.317 Re 2000 CL(45) 0.1592 0.1544 -3.045 % ±25.000 % 21.955 % within
Sn 0.317 Re 2000 CL(60) 0.1379 0.1354 -1.784 % ±25.000 % 23.216 % within
Sn 0.317 Re 2000 CL(80) 0.05445 0.06325 16.149 % ±25.000 % 8.851 % within
Sn 0.317 Re 5000 CL(30) 0.1379 0.1737 25.960 % ±25.000 % -0.960 % outside
Sn 0.317 Re 5000 CL(45) 0.1592 0.1675 5.230 % ±25.000 % 19.770 % within
Sn 0.317 Re 5000 CL(60) 0.1379 0.147 6.598 % ±25.000 % 18.402 % within
Sn 0.317 Re 5000 CL(80) 0.05445 0.06864 26.061 % ±25.000 % -1.061 % outside
Sn 0.317 Re 10000 CL(30) 0.1379 0.1841 33.500 % ±25.000 % -8.500 % outside
Sn 0.317 Re 10000 CL(45) 0.1592 0.1776 11.528 % ±25.000 % 13.472 % within
Sn 0.317 Re 10000 CL(60) 0.1379 0.1558 12.978 % ±25.000 % 12.022 % within
Sn 0.317 Re 10000 CL(80) 0.05445 0.07275 33.607 % ±25.000 % -8.607 % outside

L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_D(0), tolerance 25 %

20 rows, 1 of 20 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 Re 500 CD( 0) 0.1427 0.1775 24.355 % ±25.000 % 0.645 % within
Sn 0.130 Re 1000 CD( 0) 0.1427 0.1547 8.400 % ±25.000 % 16.600 % within
Sn 0.130 Re 2000 CD( 0) 0.1427 0.1452 1.730 % ±25.000 % 23.270 % within
Sn 0.130 Re 5000 CD( 0) 0.1427 0.1585 11.096 % ±25.000 % 13.904 % within
Sn 0.130 Re 10000 CD( 0) 0.1427 0.1672 17.185 % ±25.000 % 7.815 % within
Sn 0.144 Re 500 CD( 0) 0.1686 0.199 18.063 % ±25.000 % 6.937 % within
Sn 0.144 Re 1000 CD( 0) 0.1686 0.1735 2.902 % ±25.000 % 22.098 % within
Sn 0.144 Re 2000 CD( 0) 0.1686 0.1626 -3.550 % ±25.000 % 21.450 % within
Sn 0.144 Re 5000 CD( 0) 0.1686 0.1774 5.241 % ±25.000 % 19.759 % within
Sn 0.144 Re 10000 CD( 0) 0.1686 0.1872 11.086 % ±25.000 % 13.914 % within
Sn 0.184 Re 500 CD( 0) 0.2517 0.264 4.861 % ±25.000 % 20.139 % within
Sn 0.184 Re 1000 CD( 0) 0.2517 0.23 -8.631 % ±25.000 % 16.369 % within
Sn 0.184 Re 2000 CD( 0) 0.2517 0.2148 -14.668 % ±25.000 % 10.332 % within
Sn 0.184 Re 5000 CD( 0) 0.2517 0.2338 -7.124 % ±25.000 % 17.876 % within
Sn 0.184 Re 10000 CD( 0) 0.2517 0.2473 -1.770 % ±25.000 % 23.230 % within
Sn 0.317 Re 500 CD( 0) 0.6064 0.5296 -12.654 % ±25.000 % 12.346 % within
Sn 0.317 Re 1000 CD( 0) 0.6064 0.4614 -23.909 % ±25.000 % 1.091 % within
Sn 0.317 Re 2000 CD( 0) 0.6064 0.4257 -29.786 % ±25.000 % -4.786 % outside
Sn 0.317 Re 5000 CD( 0) 0.6064 0.4588 -24.333 % ±25.000 % 0.667 % within
Sn 0.317 Re 10000 CD( 0) 0.6064 0.4886 -19.425 % ±25.000 % 5.575 % within

L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on (default law's drag, Schubauer c_l), K = 1, C_L(theta), tolerance 25 %

80 rows, 34 of 80 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 Re 500 CL(30) 0.02468 0.03979 61.203 % ±25.000 % -36.203 % outside
Sn 0.130 Re 500 CL(45) 0.0285 0.03839 34.673 % ±25.000 % -9.673 % outside
Sn 0.130 Re 500 CL(60) 0.02468 0.03368 36.423 % ±25.000 % -11.423 % outside
Sn 0.130 Re 500 CL(80) 0.009749 0.01573 61.333 % ±25.000 % -36.333 % outside
Sn 0.130 Re 1000 CL(30) 0.02468 0.03465 40.389 % ±25.000 % -15.389 % outside
Sn 0.130 Re 1000 CL(45) 0.0285 0.03343 17.284 % ±25.000 % 7.716 % within
Sn 0.130 Re 1000 CL(60) 0.02468 0.02933 18.809 % ±25.000 % 6.191 % within
Sn 0.130 Re 1000 CL(80) 0.009749 0.0137 40.502 % ±25.000 % -15.502 % outside
Sn 0.130 Re 2000 CL(30) 0.02468 0.03251 31.699 % ±25.000 % -6.699 % outside
Sn 0.130 Re 2000 CL(45) 0.0285 0.03136 10.024 % ±25.000 % 14.976 % within
Sn 0.130 Re 2000 CL(60) 0.02468 0.02751 11.455 % ±25.000 % 13.545 % within
Sn 0.130 Re 2000 CL(80) 0.009749 0.01285 31.805 % ±25.000 % -6.805 % outside
Sn 0.130 Re 5000 CL(30) 0.02468 0.03552 43.903 % ±25.000 % -18.903 % outside
Sn 0.130 Re 5000 CL(45) 0.0285 0.03427 20.220 % ±25.000 % 4.780 % within
Sn 0.130 Re 5000 CL(60) 0.02468 0.03006 21.783 % ±25.000 % 3.217 % within
Sn 0.130 Re 5000 CL(80) 0.009749 0.01404 44.019 % ±25.000 % -19.019 % outside
Sn 0.130 Re 10000 CL(30) 0.02468 0.03748 51.844 % ±25.000 % -26.844 % outside
Sn 0.130 Re 10000 CL(45) 0.0285 0.03616 26.854 % ±25.000 % -1.854 % outside
Sn 0.130 Re 10000 CL(60) 0.02468 0.03172 28.503 % ±25.000 % -3.503 % outside
Sn 0.130 Re 10000 CL(80) 0.009749 0.01481 51.967 % ±25.000 % -26.967 % outside
Sn 0.144 Re 500 CL(30) 0.03052 0.04467 46.375 % ±25.000 % -21.375 % outside
Sn 0.144 Re 500 CL(45) 0.03524 0.04309 22.285 % ±25.000 % 2.715 % within
Sn 0.144 Re 500 CL(60) 0.03052 0.0378 23.875 % ±25.000 % 1.125 % within
Sn 0.144 Re 500 CL(80) 0.01205 0.01766 46.493 % ±25.000 % -21.493 % outside
Sn 0.144 Re 1000 CL(30) 0.03052 0.03889 27.444 % ±25.000 % -2.444 % outside
Sn 0.144 Re 1000 CL(45) 0.03524 0.03752 6.469 % ±25.000 % 18.531 % within
Sn 0.144 Re 1000 CL(60) 0.03052 0.03291 7.853 % ±25.000 % 17.147 % within
Sn 0.144 Re 1000 CL(80) 0.01205 0.01537 27.547 % ±25.000 % -2.547 % outside
Sn 0.144 Re 2000 CL(30) 0.03052 0.03644 19.398 % ±25.000 % 5.602 % within
Sn 0.144 Re 2000 CL(45) 0.03524 0.03515 -0.252 % ±25.000 % 24.748 % within
Sn 0.144 Re 2000 CL(60) 0.03052 0.03084 1.044 % ±25.000 % 23.956 % within
Sn 0.144 Re 2000 CL(80) 0.01205 0.0144 19.494 % ±25.000 % 5.506 % within
Sn 0.144 Re 5000 CL(30) 0.03052 0.03978 30.362 % ±25.000 % -5.362 % outside
Sn 0.144 Re 5000 CL(45) 0.03524 0.03838 8.907 % ±25.000 % 16.093 % within
Sn 0.144 Re 5000 CL(60) 0.03052 0.03367 10.323 % ±25.000 % 14.677 % within
Sn 0.144 Re 5000 CL(80) 0.01205 0.01572 30.467 % ±25.000 % -5.467 % outside
Sn 0.144 Re 10000 CL(30) 0.03052 0.04201 37.658 % ±25.000 % -12.658 % outside
Sn 0.144 Re 10000 CL(45) 0.03524 0.04052 15.003 % ±25.000 % 9.997 % within
Sn 0.144 Re 10000 CL(60) 0.03052 0.03555 16.498 % ±25.000 % 8.502 % within
Sn 0.144 Re 10000 CL(80) 0.01205 0.0166 37.769 % ±25.000 % -12.769 % outside
Sn 0.184 Re 500 CL(30) 0.04997 0.05944 18.934 % ±25.000 % 6.066 % within
Sn 0.184 Re 500 CL(45) 0.0577 0.05734 -0.640 % ±25.000 % 24.360 % within
Sn 0.184 Re 500 CL(60) 0.04997 0.0503 0.652 % ±25.000 % 24.348 % within
Sn 0.184 Re 500 CL(80) 0.01974 0.02349 19.030 % ±25.000 % 5.970 % within
Sn 0.184 Re 1000 CL(30) 0.04997 0.05171 3.482 % ±25.000 % 21.518 % within
Sn 0.184 Re 1000 CL(45) 0.0577 0.04989 -13.549 % ±25.000 % 11.451 % within
Sn 0.184 Re 1000 CL(60) 0.04997 0.04376 -12.425 % ±25.000 % 12.575 % within
Sn 0.184 Re 1000 CL(80) 0.01974 0.02044 3.565 % ±25.000 % 21.435 % within
Sn 0.184 Re 2000 CL(30) 0.04997 0.04827 -3.418 % ±25.000 % 21.582 % within
Sn 0.184 Re 2000 CL(45) 0.0577 0.04656 -19.314 % ±25.000 % 5.686 % within
Sn 0.184 Re 2000 CL(60) 0.04997 0.04085 -18.265 % ±25.000 % 6.735 % within
Sn 0.184 Re 2000 CL(80) 0.01974 0.01908 -3.341 % ±25.000 % 21.659 % within
Sn 0.184 Re 5000 CL(30) 0.04997 0.05258 5.205 % ±25.000 % 19.795 % within
Sn 0.184 Re 5000 CL(45) 0.0577 0.05072 -12.109 % ±25.000 % 12.891 % within
Sn 0.184 Re 5000 CL(60) 0.04997 0.04449 -10.967 % ±25.000 % 14.033 % within
Sn 0.184 Re 5000 CL(80) 0.01974 0.02078 5.290 % ±25.000 % 19.710 % within
Sn 0.184 Re 10000 CL(30) 0.04997 0.05564 11.334 % ±25.000 % 13.666 % within
Sn 0.184 Re 10000 CL(45) 0.0577 0.05367 -6.989 % ±25.000 % 18.011 % within
Sn 0.184 Re 10000 CL(60) 0.04997 0.04709 -5.780 % ±25.000 % 19.220 % within
Sn 0.184 Re 10000 CL(80) 0.01974 0.02199 11.424 % ±25.000 % 13.576 % within
Sn 0.317 Re 500 CL(30) 0.1379 0.121 -12.267 % ±25.000 % 12.733 % within
Sn 0.317 Re 500 CL(45) 0.1592 0.1167 -26.706 % ±25.000 % -1.706 % outside
Sn 0.317 Re 500 CL(60) 0.1379 0.1024 -25.753 % ±25.000 % -0.753 % outside
Sn 0.317 Re 500 CL(80) 0.05445 0.04781 -12.196 % ±25.000 % 12.804 % within
Sn 0.317 Re 1000 CL(30) 0.1379 0.105 -23.814 % ±25.000 % 1.186 % within
Sn 0.317 Re 1000 CL(45) 0.1592 0.1013 -36.352 % ±25.000 % -11.352 % outside
Sn 0.317 Re 1000 CL(60) 0.1379 0.0889 -35.525 % ±25.000 % -10.525 % outside
Sn 0.317 Re 1000 CL(80) 0.05445 0.04152 -23.752 % ±25.000 % 1.248 % within
Sn 0.317 Re 2000 CL(30) 0.1379 0.09677 -29.815 % ±25.000 % -4.815 % outside
Sn 0.317 Re 2000 CL(45) 0.1592 0.09335 -41.366 % ±25.000 % -16.366 % outside
Sn 0.317 Re 2000 CL(60) 0.1379 0.0819 -40.604 % ±25.000 % -15.604 % outside
Sn 0.317 Re 2000 CL(80) 0.05445 0.03825 -29.759 % ±25.000 % -4.759 % outside
Sn 0.317 Re 5000 CL(30) 0.1379 0.1044 -24.247 % ±25.000 % 0.753 % within
Sn 0.317 Re 5000 CL(45) 0.1592 0.1008 -36.714 % ±25.000 % -11.714 % outside
Sn 0.317 Re 5000 CL(60) 0.1379 0.08839 -35.892 % ±25.000 % -10.892 % outside
Sn 0.317 Re 5000 CL(80) 0.05445 0.04128 -24.186 % ±25.000 % 0.814 % within
Sn 0.317 Re 10000 CL(30) 0.1379 0.1114 -19.222 % ±25.000 % 5.778 % within
Sn 0.317 Re 10000 CL(45) 0.1592 0.1074 -32.516 % ±25.000 % -7.516 % outside
Sn 0.317 Re 10000 CL(60) 0.1379 0.09426 -31.639 % ±25.000 % -6.639 % outside
Sn 0.317 Re 10000 CL(80) 0.05445 0.04402 -19.157 % ±25.000 % 5.843 % within

L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_D(0), tolerance 25 %

20 rows, 1 of 20 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 Re 500 CD( 0) 0.1427 0.1851 29.706 % ±25.000 % -4.706 % outside
Sn 0.130 Re 1000 CD( 0) 0.1427 0.1614 13.121 % ±25.000 % 11.879 % within
Sn 0.130 Re 2000 CD( 0) 0.1427 0.1521 6.612 % ±25.000 % 18.388 % within
Sn 0.130 Re 5000 CD( 0) 0.1427 0.1666 16.738 % ±25.000 % 8.262 % within
Sn 0.130 Re 10000 CD( 0) 0.1427 0.1753 22.851 % ±25.000 % 2.149 % within
Sn 0.144 Re 500 CD( 0) 0.1686 0.2102 24.705 % ±25.000 % 0.295 % within
Sn 0.144 Re 1000 CD( 0) 0.1686 0.1833 8.760 % ±25.000 % 16.240 % within
Sn 0.144 Re 2000 CD( 0) 0.1686 0.1728 2.501 % ±25.000 % 22.499 % within
Sn 0.144 Re 5000 CD( 0) 0.1686 0.1892 12.237 % ±25.000 % 12.763 % within
Sn 0.144 Re 10000 CD( 0) 0.1686 0.1991 18.114 % ±25.000 % 6.886 % within
Sn 0.184 Re 500 CD( 0) 0.2517 0.2892 14.883 % ±25.000 % 10.117 % within
Sn 0.184 Re 1000 CD( 0) 0.2517 0.2522 0.194 % ±25.000 % 24.806 % within
Sn 0.184 Re 2000 CD( 0) 0.2517 0.2377 -5.572 % ±25.000 % 19.428 % within
Sn 0.184 Re 5000 CD( 0) 0.2517 0.2603 3.397 % ±25.000 % 21.603 % within
Sn 0.184 Re 10000 CD( 0) 0.2517 0.2739 8.811 % ±25.000 % 16.189 % within
Sn 0.317 Re 500 CD( 0) 0.6064 0.6591 8.699 % ±25.000 % 16.301 % within
Sn 0.317 Re 1000 CD( 0) 0.6064 0.5748 -5.200 % ±25.000 % 19.800 % within
Sn 0.317 Re 2000 CD( 0) 0.6064 0.5417 -10.655 % ±25.000 % 14.345 % within
Sn 0.317 Re 5000 CD( 0) 0.6064 0.5932 -2.169 % ±25.000 % 22.831 % within
Sn 0.317 Re 10000 CD( 0) 0.6064 0.6243 2.954 % ±25.000 % 22.046 % within

L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1, C_L(theta), tolerance 25 %

80 rows, 31 of 80 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 Re 500 CL(30) 0.02468 0.0415 68.134 % ±25.000 % -43.134 % outside
Sn 0.130 Re 500 CL(45) 0.0285 0.04004 40.463 % ±25.000 % -15.463 % outside
Sn 0.130 Re 500 CL(60) 0.02468 0.03512 42.289 % ±25.000 % -17.289 % outside
Sn 0.130 Re 500 CL(80) 0.009749 0.0164 68.269 % ±25.000 % -43.269 % outside
Sn 0.130 Re 1000 CL(30) 0.02468 0.03616 46.500 % ±25.000 % -21.500 % outside
Sn 0.130 Re 1000 CL(45) 0.0285 0.03488 22.389 % ±25.000 % 2.611 % within
Sn 0.130 Re 1000 CL(60) 0.02468 0.0306 23.980 % ±25.000 % 1.020 % within
Sn 0.130 Re 1000 CL(80) 0.009749 0.01429 46.618 % ±25.000 % -21.618 % outside
Sn 0.130 Re 2000 CL(30) 0.02468 0.03407 38.019 % ±25.000 % -13.019 % outside
Sn 0.130 Re 2000 CL(45) 0.0285 0.03287 15.304 % ±25.000 % 9.696 % within
Sn 0.130 Re 2000 CL(60) 0.02468 0.02883 16.803 % ±25.000 % 8.197 % within
Sn 0.130 Re 2000 CL(80) 0.009749 0.01347 38.130 % ±25.000 % -13.130 % outside
Sn 0.130 Re 5000 CL(30) 0.02468 0.03733 51.214 % ±25.000 % -26.214 % outside
Sn 0.130 Re 5000 CL(45) 0.0285 0.03601 26.327 % ±25.000 % -1.327 % outside
Sn 0.130 Re 5000 CL(60) 0.02468 0.03159 27.970 % ±25.000 % -2.970 % outside
Sn 0.130 Re 5000 CL(80) 0.009749 0.01475 51.336 % ±25.000 % -26.336 % outside
Sn 0.130 Re 10000 CL(30) 0.02468 0.03929 59.187 % ±25.000 % -34.187 % outside
Sn 0.130 Re 10000 CL(45) 0.0285 0.03791 32.988 % ±25.000 % -7.988 % outside
Sn 0.130 Re 10000 CL(60) 0.02468 0.03325 34.717 % ±25.000 % -9.717 % outside
Sn 0.130 Re 10000 CL(80) 0.009749 0.01553 59.315 % ±25.000 % -34.315 % outside
Sn 0.144 Re 500 CL(30) 0.03052 0.04718 54.603 % ±25.000 % -29.603 % outside
Sn 0.144 Re 500 CL(45) 0.03524 0.04551 29.159 % ±25.000 % -4.159 % outside
Sn 0.144 Re 500 CL(60) 0.03052 0.03993 30.838 % ±25.000 % -5.838 % outside
Sn 0.144 Re 500 CL(80) 0.01205 0.01865 54.728 % ±25.000 % -29.728 % outside
Sn 0.144 Re 1000 CL(30) 0.03052 0.0411 34.693 % ±25.000 % -9.693 % outside
Sn 0.144 Re 1000 CL(45) 0.03524 0.03965 12.526 % ±25.000 % 12.474 % within
Sn 0.144 Re 1000 CL(60) 0.03052 0.03479 13.989 % ±25.000 % 11.011 % within
Sn 0.144 Re 1000 CL(80) 0.01205 0.01625 34.802 % ±25.000 % -9.802 % outside
Sn 0.144 Re 2000 CL(30) 0.03052 0.03872 26.890 % ±25.000 % -1.890 % outside
Sn 0.144 Re 2000 CL(45) 0.03524 0.03735 6.007 % ±25.000 % 18.993 % within
Sn 0.144 Re 2000 CL(60) 0.03052 0.03277 7.385 % ±25.000 % 17.615 % within
Sn 0.144 Re 2000 CL(80) 0.01205 0.01531 26.992 % ±25.000 % -1.992 % outside
Sn 0.144 Re 5000 CL(30) 0.03052 0.04243 39.032 % ±25.000 % -14.032 % outside
Sn 0.144 Re 5000 CL(45) 0.03524 0.04093 16.150 % ±25.000 % 8.850 % within
Sn 0.144 Re 5000 CL(60) 0.03052 0.03591 17.660 % ±25.000 % 7.340 % within
Sn 0.144 Re 5000 CL(80) 0.01205 0.01677 39.144 % ±25.000 % -14.144 % outside
Sn 0.144 Re 10000 CL(30) 0.03052 0.04467 46.369 % ±25.000 % -21.369 % outside
Sn 0.144 Re 10000 CL(45) 0.03524 0.04309 22.280 % ±25.000 % 2.720 % within
Sn 0.144 Re 10000 CL(60) 0.03052 0.0378 23.869 % ±25.000 % 1.131 % within
Sn 0.144 Re 10000 CL(80) 0.01205 0.01765 46.487 % ±25.000 % -21.487 % outside
Sn 0.184 Re 500 CL(30) 0.04997 0.06511 30.287 % ±25.000 % -5.287 % outside
Sn 0.184 Re 500 CL(45) 0.0577 0.06281 8.845 % ±25.000 % 16.155 % within
Sn 0.184 Re 500 CL(60) 0.04997 0.0551 10.260 % ±25.000 % 14.740 % within
Sn 0.184 Re 500 CL(80) 0.01974 0.02573 30.392 % ±25.000 % -5.392 % outside
Sn 0.184 Re 1000 CL(30) 0.04997 0.0567 13.466 % ±25.000 % 11.534 % within
Sn 0.184 Re 1000 CL(45) 0.0577 0.0547 -5.208 % ±25.000 % 19.792 % within
Sn 0.184 Re 1000 CL(60) 0.04997 0.04799 -3.976 % ±25.000 % 21.024 % within
Sn 0.184 Re 1000 CL(80) 0.01974 0.02241 13.558 % ±25.000 % 11.442 % within
Sn 0.184 Re 2000 CL(30) 0.04997 0.05341 6.876 % ±25.000 % 18.124 % within
Sn 0.184 Re 2000 CL(45) 0.0577 0.05152 -10.713 % ±25.000 % 14.287 % within
Sn 0.184 Re 2000 CL(60) 0.04997 0.0452 -9.552 % ±25.000 % 15.448 % within
Sn 0.184 Re 2000 CL(80) 0.01974 0.02111 6.963 % ±25.000 % 18.037 % within
Sn 0.184 Re 5000 CL(30) 0.04997 0.05853 17.130 % ±25.000 % 7.870 % within
Sn 0.184 Re 5000 CL(45) 0.0577 0.05647 -2.147 % ±25.000 % 22.853 % within
Sn 0.184 Re 5000 CL(60) 0.04997 0.04954 -0.875 % ±25.000 % 24.125 % within
Sn 0.184 Re 5000 CL(80) 0.01974 0.02314 17.225 % ±25.000 % 7.775 % within
Sn 0.184 Re 10000 CL(30) 0.04997 0.06163 23.329 % ±25.000 % 1.671 % within
Sn 0.184 Re 10000 CL(45) 0.0577 0.05945 3.032 % ±25.000 % 21.968 % within
Sn 0.184 Re 10000 CL(60) 0.04997 0.05216 4.371 % ±25.000 % 20.629 % within
Sn 0.184 Re 10000 CL(80) 0.01974 0.02436 23.428 % ±25.000 % 1.572 % within
Sn 0.317 Re 500 CL(30) 0.1379 0.1505 9.121 % ±25.000 % 15.879 % within
Sn 0.317 Re 500 CL(45) 0.1592 0.1451 -8.838 % ±25.000 % 16.162 % within
Sn 0.317 Re 500 CL(60) 0.1379 0.1273 -7.653 % ±25.000 % 17.347 % within
Sn 0.317 Re 500 CL(80) 0.05445 0.05947 9.209 % ±25.000 % 15.791 % within
Sn 0.317 Re 1000 CL(30) 0.1379 0.1308 -5.125 % ±25.000 % 19.875 % within
Sn 0.317 Re 1000 CL(45) 0.1592 0.1262 -20.739 % ±25.000 % 4.261 % within
Sn 0.317 Re 1000 CL(60) 0.1379 0.1107 -19.709 % ±25.000 % 5.291 % within
Sn 0.317 Re 1000 CL(80) 0.05445 0.0517 -5.048 % ±25.000 % 19.952 % within
Sn 0.317 Re 2000 CL(30) 0.1379 0.1231 -10.694 % ±25.000 % 14.306 % within
Sn 0.317 Re 2000 CL(45) 0.1592 0.1188 -25.391 % ±25.000 % -0.391 % outside
Sn 0.317 Re 2000 CL(60) 0.1379 0.1042 -24.422 % ±25.000 % 0.578 % within
Sn 0.317 Re 2000 CL(80) 0.05445 0.04867 -10.622 % ±25.000 % 14.378 % within
Sn 0.317 Re 5000 CL(30) 0.1379 0.1351 -2.026 % ±25.000 % 22.974 % within
Sn 0.317 Re 5000 CL(45) 0.1592 0.1303 -18.150 % ±25.000 % 6.850 % within
Sn 0.317 Re 5000 CL(60) 0.1379 0.1143 -17.086 % ±25.000 % 7.914 % within
Sn 0.317 Re 5000 CL(80) 0.05445 0.05339 -1.946 % ±25.000 % 23.054 % within
Sn 0.317 Re 10000 CL(30) 0.1379 0.1423 3.222 % ±25.000 % 21.778 % within
Sn 0.317 Re 10000 CL(45) 0.1592 0.1373 -13.766 % ±25.000 % 11.234 % within
Sn 0.317 Re 10000 CL(60) 0.1379 0.1204 -12.645 % ±25.000 % 12.355 % within
Sn 0.317 Re 10000 CL(80) 0.05445 0.05625 3.306 % ±25.000 % 21.694 % within

L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_D(0), tolerance 25 %

20 rows, 6 of 20 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 Re 500 CD( 0) 0.1427 0.2087 46.254 % ±25.000 % -21.254 % outside
Sn 0.130 Re 1000 CD( 0) 0.1427 0.182 27.525 % ±25.000 % -2.525 % outside
Sn 0.130 Re 2000 CD( 0) 0.1427 0.1712 19.979 % ±25.000 % 5.021 % within
Sn 0.130 Re 5000 CD( 0) 0.1427 0.1873 31.235 % ±25.000 % -6.235 % outside
Sn 0.130 Re 10000 CD( 0) 0.1427 0.1973 38.237 % ±25.000 % -13.237 % outside
Sn 0.144 Re 500 CD( 0) 0.1686 0.2345 39.146 % ±25.000 % -14.146 % outside
Sn 0.144 Re 1000 CD( 0) 0.1686 0.2045 21.314 % ±25.000 % 3.686 % within
Sn 0.144 Re 2000 CD( 0) 0.1686 0.1922 14.029 % ±25.000 % 10.971 % within
Sn 0.144 Re 5000 CD( 0) 0.1686 0.2101 24.655 % ±25.000 % 0.345 % within
Sn 0.144 Re 10000 CD( 0) 0.1686 0.2214 31.372 % ±25.000 % -6.372 % outside
Sn 0.184 Re 500 CD( 0) 0.2517 0.3133 24.438 % ±25.000 % 0.562 % within
Sn 0.184 Re 1000 CD( 0) 0.2517 0.273 8.462 % ±25.000 % 16.538 % within
Sn 0.184 Re 2000 CD( 0) 0.2517 0.256 1.686 % ±25.000 % 23.314 % within
Sn 0.184 Re 5000 CD( 0) 0.2517 0.2794 10.974 % ±25.000 % 14.026 % within
Sn 0.184 Re 10000 CD( 0) 0.2517 0.2948 17.121 % ±25.000 % 7.879 % within
Sn 0.317 Re 500 CD( 0) 0.6064 0.6513 7.409 % ±25.000 % 17.591 % within
Sn 0.317 Re 1000 CD( 0) 0.6064 0.5674 -6.428 % ±25.000 % 18.572 % within
Sn 0.317 Re 2000 CD( 0) 0.6064 0.5279 -12.935 % ±25.000 % 12.065 % within
Sn 0.317 Re 5000 CD( 0) 0.6064 0.573 -5.505 % ±25.000 % 19.495 % within
Sn 0.317 Re 10000 CD( 0) 0.6064 0.6073 0.152 % ±25.000 % 24.848 % within

L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %

80 rows, 46 of 80 outside the tolerance.

Chart: L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %; L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %.

Model minus measurement per case with the tolerance band L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 % tolerance ±25 % 0 50 100 model / measured − 1 [%]; shaded: tolerance Sn 0.130 Re 500 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(30): measured 0.02468, model 0.04687, error 89.868 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(30): measured 0.02468, model 0.0498, error 101.763 %, tolerance ±25 % Sn 0.130 Re 500 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(45): measured 0.0285, model 0.04521, error 58.620 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(45): measured 0.0285, model 0.04804, error 68.558 %, tolerance ±25 % Sn 0.130 Re 500 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(60): measured 0.02468, model 0.03966, error 60.682 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(60): measured 0.02468, model 0.04215, error 70.749 %, tolerance ±25 % Sn 0.130 Re 500 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(80): measured 0.009749, model 0.01852, error 90.021 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 500 CL(80): measured 0.009749, model 0.01969, error 101.926 %, tolerance ±25 % Sn 0.130 Re 1000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(30): measured 0.02468, model 0.04082, error 65.369 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(30): measured 0.02468, model 0.04342, error 75.889 %, tolerance ±25 % Sn 0.130 Re 1000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(45): measured 0.0285, model 0.03938, error 38.153 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(45): measured 0.0285, model 0.04188, error 46.942 %, tolerance ±25 % Sn 0.130 Re 1000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(60): measured 0.02468, model 0.03455, error 39.949 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(60): measured 0.02468, model 0.03674, error 48.852 %, tolerance ±25 % Sn 0.130 Re 1000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(80): measured 0.009749, model 0.01613, error 65.503 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 1000 CL(80): measured 0.009749, model 0.01716, error 76.031 %, tolerance ±25 % Sn 0.130 Re 2000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(30): measured 0.02468, model 0.03839, error 55.513 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(30): measured 0.02468, model 0.04109, error 66.442 %, tolerance ±25 % Sn 0.130 Re 2000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(45): measured 0.0285, model 0.03703, error 29.919 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(45): measured 0.0285, model 0.03963, error 39.050 %, tolerance ±25 % Sn 0.130 Re 2000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(60): measured 0.02468, model 0.03249, error 31.608 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(60): measured 0.02468, model 0.03477, error 40.857 %, tolerance ±25 % Sn 0.130 Re 2000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(80): measured 0.009749, model 0.01517, error 55.638 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 2000 CL(80): measured 0.009749, model 0.01624, error 66.577 %, tolerance ±25 % Sn 0.130 Re 5000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(30): measured 0.02468, model 0.04202, error 70.217 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(30): measured 0.02468, model 0.04513, error 82.844 %, tolerance ±25 % Sn 0.130 Re 5000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(45): measured 0.0285, model 0.04053, error 42.203 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(45): measured 0.0285, model 0.04354, error 52.752 %, tolerance ±25 % Sn 0.130 Re 5000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(60): measured 0.02468, model 0.03556, error 44.052 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(60): measured 0.02468, model 0.0382, error 54.738 %, tolerance ±25 % Sn 0.130 Re 5000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(80): measured 0.009749, model 0.01661, error 70.355 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 5000 CL(80): measured 0.009749, model 0.01784, error 82.992 %, tolerance ±25 % Sn 0.130 Re 10000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(30): measured 0.02468, model 0.04428, error 79.375 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(30): measured 0.02468, model 0.04738, error 91.926 %, tolerance ±25 % Sn 0.130 Re 10000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(45): measured 0.0285, model 0.04271, error 49.854 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(45): measured 0.0285, model 0.0457, error 60.339 %, tolerance ±25 % Sn 0.130 Re 10000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(60): measured 0.02468, model 0.03747, error 51.802 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(60): measured 0.02468, model 0.04009, error 62.424 %, tolerance ±25 % Sn 0.130 Re 10000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(80): measured 0.009749, model 0.0175, error 79.520 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.130 Re 10000 CL(80): measured 0.009749, model 0.01873, error 92.081 %, tolerance ±25 % Sn 0.144 Re 500 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(30): measured 0.03052, model 0.05273, error 72.807 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(30): measured 0.03052, model 0.05687, error 86.361 %, tolerance ±25 % Sn 0.144 Re 500 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(45): measured 0.03524, model 0.05087, error 44.367 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(45): measured 0.03524, model 0.05486, error 55.690 %, tolerance ±25 % Sn 0.144 Re 500 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(60): measured 0.03052, model 0.04463, error 46.243 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(60): measured 0.03052, model 0.04813, error 57.714 %, tolerance ±25 % Sn 0.144 Re 500 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(80): measured 0.01205, model 0.02084, error 72.946 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 500 CL(80): measured 0.01205, model 0.02248, error 86.511 %, tolerance ±25 % Sn 0.144 Re 1000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(30): measured 0.03052, model 0.04592, error 50.470 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(30): measured 0.03052, model 0.04958, error 62.454 %, tolerance ±25 % Sn 0.144 Re 1000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(45): measured 0.03524, model 0.0443, error 25.706 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(45): measured 0.03524, model 0.04782, error 35.717 %, tolerance ±25 % Sn 0.144 Re 1000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(60): measured 0.03052, model 0.03886, error 27.340 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(60): measured 0.03052, model 0.04195, error 37.482 %, tolerance ±25 % Sn 0.144 Re 1000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(80): measured 0.01205, model 0.01815, error 50.592 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 1000 CL(80): measured 0.01205, model 0.01959, error 62.585 %, tolerance ±25 % Sn 0.144 Re 2000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(30): measured 0.03052, model 0.04314, error 41.361 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(30): measured 0.03052, model 0.04694, error 53.809 %, tolerance ±25 % Sn 0.144 Re 2000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(45): measured 0.03524, model 0.04161, error 18.096 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(45): measured 0.03524, model 0.04528, error 28.495 %, tolerance ±25 % Sn 0.144 Re 2000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(60): measured 0.03052, model 0.03651, error 19.631 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(60): measured 0.03052, model 0.03972, error 30.166 %, tolerance ±25 % Sn 0.144 Re 2000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(80): measured 0.01205, model 0.01705, error 41.475 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 2000 CL(80): measured 0.01205, model 0.01855, error 53.933 %, tolerance ±25 % Sn 0.144 Re 5000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(30): measured 0.03052, model 0.04719, error 54.651 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(30): measured 0.03052, model 0.05158, error 69.035 %, tolerance ±25 % Sn 0.144 Re 5000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(45): measured 0.03524, model 0.04553, error 29.198 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(45): measured 0.03524, model 0.04976, error 41.215 %, tolerance ±25 % Sn 0.144 Re 5000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(60): measured 0.03052, model 0.03994, error 30.878 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(60): measured 0.03052, model 0.04365, error 43.051 %, tolerance ±25 % Sn 0.144 Re 5000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(80): measured 0.01205, model 0.01865, error 54.775 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 5000 CL(80): measured 0.01205, model 0.02039, error 69.171 %, tolerance ±25 % Sn 0.144 Re 10000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(30): measured 0.03052, model 0.04976, error 63.063 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(30): measured 0.03052, model 0.05413, error 77.373 %, tolerance ±25 % Sn 0.144 Re 10000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(45): measured 0.03524, model 0.048, error 36.226 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(45): measured 0.03524, model 0.05222, error 48.182 %, tolerance ±25 % Sn 0.144 Re 10000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(60): measured 0.03052, model 0.04211, error 37.997 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(60): measured 0.03052, model 0.04581, error 50.108 %, tolerance ±25 % Sn 0.144 Re 10000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(80): measured 0.01205, model 0.01967, error 63.195 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.144 Re 10000 CL(80): measured 0.01205, model 0.02139, error 77.516 %, tolerance ±25 % Sn 0.184 Re 500 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(30): measured 0.04997, model 0.07071, error 41.492 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(30): measured 0.04997, model 0.07959, error 59.260 %, tolerance ±25 % Sn 0.184 Re 500 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(45): measured 0.0577, model 0.06821, error 18.206 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(45): measured 0.0577, model 0.07678, error 33.050 %, tolerance ±25 % Sn 0.184 Re 500 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(60): measured 0.04997, model 0.05984, error 19.742 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(60): measured 0.04997, model 0.06735, error 34.779 %, tolerance ±25 % Sn 0.184 Re 500 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(80): measured 0.01974, model 0.02795, error 41.606 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 500 CL(80): measured 0.01974, model 0.03146, error 59.389 %, tolerance ±25 % Sn 0.184 Re 1000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(30): measured 0.04997, model 0.06152, error 23.110 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(30): measured 0.04997, model 0.06937, error 38.809 %, tolerance ±25 % Sn 0.184 Re 1000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(45): measured 0.0577, model 0.05935, error 2.849 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(45): measured 0.0577, model 0.06692, error 15.964 %, tolerance ±25 % Sn 0.184 Re 1000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(60): measured 0.04997, model 0.05207, error 4.186 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(60): measured 0.04997, model 0.0587, error 17.471 %, tolerance ±25 % Sn 0.184 Re 1000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(80): measured 0.01974, model 0.02432, error 23.209 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 1000 CL(80): measured 0.01974, model 0.02742, error 38.921 %, tolerance ±25 % Sn 0.184 Re 2000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(30): measured 0.04997, model 0.05764, error 15.333 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(30): measured 0.04997, model 0.06578, error 31.634 %, tolerance ±25 % Sn 0.184 Re 2000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(45): measured 0.0577, model 0.0556, error -3.648 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(45): measured 0.0577, model 0.06346, error 9.970 %, tolerance ±25 % Sn 0.184 Re 2000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(60): measured 0.04997, model 0.04878, error -2.396 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(60): measured 0.04997, model 0.05567, error 11.400 %, tolerance ±25 % Sn 0.184 Re 2000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(80): measured 0.01974, model 0.02278, error 15.426 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 2000 CL(80): measured 0.01974, model 0.026, error 31.741 %, tolerance ±25 % Sn 0.184 Re 5000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(30): measured 0.04997, model 0.06297, error 25.997 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(30): measured 0.04997, model 0.07238, error 44.844 %, tolerance ±25 % Sn 0.184 Re 5000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(45): measured 0.0577, model 0.06074, error 5.260 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(45): measured 0.0577, model 0.06983, error 21.006 %, tolerance ±25 % Sn 0.184 Re 5000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(60): measured 0.04997, model 0.05329, error 6.629 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(60): measured 0.04997, model 0.06126, error 22.579 %, tolerance ±25 % Sn 0.184 Re 5000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(80): measured 0.01974, model 0.02489, error 26.098 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 5000 CL(80): measured 0.01974, model 0.02861, error 44.961 %, tolerance ±25 % Sn 0.184 Re 10000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(30): measured 0.04997, model 0.0665, error 33.065 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(30): measured 0.04997, model 0.07588, error 51.840 %, tolerance ±25 % Sn 0.184 Re 10000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(45): measured 0.0577, model 0.06415, error 11.166 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(45): measured 0.0577, model 0.0732, error 26.850 %, tolerance ±25 % Sn 0.184 Re 10000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(60): measured 0.04997, model 0.05628, error 12.611 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(60): measured 0.04997, model 0.06422, error 28.499 %, tolerance ±25 % Sn 0.184 Re 10000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(80): measured 0.01974, model 0.02628, error 33.173 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.184 Re 10000 CL(80): measured 0.01974, model 0.02999, error 51.962 %, tolerance ±25 % Sn 0.317 Re 500 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(30): measured 0.1379, model 0.1498, error 8.670 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(30): measured 0.1379, model 0.1959, error 42.064 %, tolerance ±25 % Sn 0.317 Re 500 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(45): measured 0.1592, model 0.1445, error -9.215 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(45): measured 0.1592, model 0.189, error 18.683 %, tolerance ±25 % Sn 0.317 Re 500 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(60): measured 0.1379, model 0.1268, error -8.035 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(60): measured 0.1379, model 0.1658, error 20.226 %, tolerance ±25 % Sn 0.317 Re 500 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(80): measured 0.05445, model 0.05922, error 8.757 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 500 CL(80): measured 0.05445, model 0.07742, error 42.178 %, tolerance ±25 % Sn 0.317 Re 1000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(30): measured 0.1379, model 0.13, error -5.709 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(30): measured 0.1379, model 0.1706, error 23.758 %, tolerance ±25 % Sn 0.317 Re 1000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(45): measured 0.1592, model 0.1254, error -21.227 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(45): measured 0.1592, model 0.1646, error 3.390 %, tolerance ±25 % Sn 0.317 Re 1000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(60): measured 0.1379, model 0.11, error -20.203 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(60): measured 0.1379, model 0.1444, error 4.734 %, tolerance ±25 % Sn 0.317 Re 1000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(80): measured 0.05445, model 0.05139, error -5.633 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 1000 CL(80): measured 0.05445, model 0.06744, error 23.858 %, tolerance ±25 % Sn 0.317 Re 2000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(30): measured 0.1379, model 0.1207, error -12.433 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(30): measured 0.1379, model 0.163, error 18.194 %, tolerance ±25 % Sn 0.317 Re 2000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(45): measured 0.1592, model 0.1165, error -26.844 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(45): measured 0.1592, model 0.1572, error -1.258 %, tolerance ±25 % Sn 0.317 Re 2000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(60): measured 0.1379, model 0.1022, error -25.893 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(60): measured 0.1379, model 0.1379, error 0.026 %, tolerance ±25 % Sn 0.317 Re 2000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(80): measured 0.05445, model 0.04772, error -12.362 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 2000 CL(80): measured 0.05445, model 0.06441, error 18.289 %, tolerance ±25 % Sn 0.317 Re 5000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(30): measured 0.1379, model 0.1313, error -4.752 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(30): measured 0.1379, model 0.1802, error 30.717 %, tolerance ±25 % Sn 0.317 Re 5000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(45): measured 0.1592, model 0.1267, error -20.428 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(45): measured 0.1592, model 0.1739, error 9.204 %, tolerance ±25 % Sn 0.317 Re 5000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(60): measured 0.1379, model 0.1111, error -19.393 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(60): measured 0.1379, model 0.1525, error 10.623 %, tolerance ±25 % Sn 0.317 Re 5000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(80): measured 0.05445, model 0.05191, error -4.675 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 5000 CL(80): measured 0.05445, model 0.07124, error 30.822 %, tolerance ±25 % Sn 0.317 Re 10000 CL(30) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(30): measured 0.1379, model 0.1394, error 1.115 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(30): measured 0.1379, model 0.1882, error 36.464 %, tolerance ±25 % Sn 0.317 Re 10000 CL(45) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(45): measured 0.1592, model 0.1345, error -15.526 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(45): measured 0.1592, model 0.1815, error 14.005 %, tolerance ±25 % Sn 0.317 Re 10000 CL(60) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(60): measured 0.1379, model 0.118, error -14.428 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(60): measured 0.1379, model 0.1592, error 15.487 %, tolerance ±25 % Sn 0.317 Re 10000 CL(80) L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction on, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(80): measured 0.05445, model 0.0551, error 1.197 %, tolerance ±25 % L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %: Sn 0.317 Re 10000 CL(80): measured 0.05445, model 0.07437, error 36.574 %, tolerance ±25 %

Case Measured Model Error Tolerance Margin Result
Sn 0.130 Re 500 CL(30) 0.02468 0.04687 89.868 % ±25.000 % -64.868 % outside
Sn 0.130 Re 500 CL(45) 0.0285 0.04521 58.620 % ±25.000 % -33.620 % outside
Sn 0.130 Re 500 CL(60) 0.02468 0.03966 60.682 % ±25.000 % -35.682 % outside
Sn 0.130 Re 500 CL(80) 0.009749 0.01852 90.021 % ±25.000 % -65.021 % outside
Sn 0.130 Re 1000 CL(30) 0.02468 0.04082 65.369 % ±25.000 % -40.369 % outside
Sn 0.130 Re 1000 CL(45) 0.0285 0.03938 38.153 % ±25.000 % -13.153 % outside
Sn 0.130 Re 1000 CL(60) 0.02468 0.03455 39.949 % ±25.000 % -14.949 % outside
Sn 0.130 Re 1000 CL(80) 0.009749 0.01613 65.503 % ±25.000 % -40.503 % outside
Sn 0.130 Re 2000 CL(30) 0.02468 0.03839 55.513 % ±25.000 % -30.513 % outside
Sn 0.130 Re 2000 CL(45) 0.0285 0.03703 29.919 % ±25.000 % -4.919 % outside
Sn 0.130 Re 2000 CL(60) 0.02468 0.03249 31.608 % ±25.000 % -6.608 % outside
Sn 0.130 Re 2000 CL(80) 0.009749 0.01517 55.638 % ±25.000 % -30.638 % outside
Sn 0.130 Re 5000 CL(30) 0.02468 0.04202 70.217 % ±25.000 % -45.217 % outside
Sn 0.130 Re 5000 CL(45) 0.0285 0.04053 42.203 % ±25.000 % -17.203 % outside
Sn 0.130 Re 5000 CL(60) 0.02468 0.03556 44.052 % ±25.000 % -19.052 % outside
Sn 0.130 Re 5000 CL(80) 0.009749 0.01661 70.355 % ±25.000 % -45.355 % outside
Sn 0.130 Re 10000 CL(30) 0.02468 0.04428 79.375 % ±25.000 % -54.375 % outside
Sn 0.130 Re 10000 CL(45) 0.0285 0.04271 49.854 % ±25.000 % -24.854 % outside
Sn 0.130 Re 10000 CL(60) 0.02468 0.03747 51.802 % ±25.000 % -26.802 % outside
Sn 0.130 Re 10000 CL(80) 0.009749 0.0175 79.520 % ±25.000 % -54.520 % outside
Sn 0.144 Re 500 CL(30) 0.03052 0.05273 72.807 % ±25.000 % -47.807 % outside
Sn 0.144 Re 500 CL(45) 0.03524 0.05087 44.367 % ±25.000 % -19.367 % outside
Sn 0.144 Re 500 CL(60) 0.03052 0.04463 46.243 % ±25.000 % -21.243 % outside
Sn 0.144 Re 500 CL(80) 0.01205 0.02084 72.946 % ±25.000 % -47.946 % outside
Sn 0.144 Re 1000 CL(30) 0.03052 0.04592 50.470 % ±25.000 % -25.470 % outside
Sn 0.144 Re 1000 CL(45) 0.03524 0.0443 25.706 % ±25.000 % -0.706 % outside
Sn 0.144 Re 1000 CL(60) 0.03052 0.03886 27.340 % ±25.000 % -2.340 % outside
Sn 0.144 Re 1000 CL(80) 0.01205 0.01815 50.592 % ±25.000 % -25.592 % outside
Sn 0.144 Re 2000 CL(30) 0.03052 0.04314 41.361 % ±25.000 % -16.361 % outside
Sn 0.144 Re 2000 CL(45) 0.03524 0.04161 18.096 % ±25.000 % 6.904 % within
Sn 0.144 Re 2000 CL(60) 0.03052 0.03651 19.631 % ±25.000 % 5.369 % within
Sn 0.144 Re 2000 CL(80) 0.01205 0.01705 41.475 % ±25.000 % -16.475 % outside
Sn 0.144 Re 5000 CL(30) 0.03052 0.04719 54.651 % ±25.000 % -29.651 % outside
Sn 0.144 Re 5000 CL(45) 0.03524 0.04553 29.198 % ±25.000 % -4.198 % outside
Sn 0.144 Re 5000 CL(60) 0.03052 0.03994 30.878 % ±25.000 % -5.878 % outside
Sn 0.144 Re 5000 CL(80) 0.01205 0.01865 54.775 % ±25.000 % -29.775 % outside
Sn 0.144 Re 10000 CL(30) 0.03052 0.04976 63.063 % ±25.000 % -38.063 % outside
Sn 0.144 Re 10000 CL(45) 0.03524 0.048 36.226 % ±25.000 % -11.226 % outside
Sn 0.144 Re 10000 CL(60) 0.03052 0.04211 37.997 % ±25.000 % -12.997 % outside
Sn 0.144 Re 10000 CL(80) 0.01205 0.01967 63.195 % ±25.000 % -38.195 % outside
Sn 0.184 Re 500 CL(30) 0.04997 0.07071 41.492 % ±25.000 % -16.492 % outside
Sn 0.184 Re 500 CL(45) 0.0577 0.06821 18.206 % ±25.000 % 6.794 % within
Sn 0.184 Re 500 CL(60) 0.04997 0.05984 19.742 % ±25.000 % 5.258 % within
Sn 0.184 Re 500 CL(80) 0.01974 0.02795 41.606 % ±25.000 % -16.606 % outside
Sn 0.184 Re 1000 CL(30) 0.04997 0.06152 23.110 % ±25.000 % 1.890 % within
Sn 0.184 Re 1000 CL(45) 0.0577 0.05935 2.849 % ±25.000 % 22.151 % within
Sn 0.184 Re 1000 CL(60) 0.04997 0.05207 4.186 % ±25.000 % 20.814 % within
Sn 0.184 Re 1000 CL(80) 0.01974 0.02432 23.209 % ±25.000 % 1.791 % within
Sn 0.184 Re 2000 CL(30) 0.04997 0.05764 15.333 % ±25.000 % 9.667 % within
Sn 0.184 Re 2000 CL(45) 0.0577 0.0556 -3.648 % ±25.000 % 21.352 % within
Sn 0.184 Re 2000 CL(60) 0.04997 0.04878 -2.396 % ±25.000 % 22.604 % within
Sn 0.184 Re 2000 CL(80) 0.01974 0.02278 15.426 % ±25.000 % 9.574 % within
Sn 0.184 Re 5000 CL(30) 0.04997 0.06297 25.997 % ±25.000 % -0.997 % outside
Sn 0.184 Re 5000 CL(45) 0.0577 0.06074 5.260 % ±25.000 % 19.740 % within
Sn 0.184 Re 5000 CL(60) 0.04997 0.05329 6.629 % ±25.000 % 18.371 % within
Sn 0.184 Re 5000 CL(80) 0.01974 0.02489 26.098 % ±25.000 % -1.098 % outside
Sn 0.184 Re 10000 CL(30) 0.04997 0.0665 33.065 % ±25.000 % -8.065 % outside
Sn 0.184 Re 10000 CL(45) 0.0577 0.06415 11.166 % ±25.000 % 13.834 % within
Sn 0.184 Re 10000 CL(60) 0.04997 0.05628 12.611 % ±25.000 % 12.389 % within
Sn 0.184 Re 10000 CL(80) 0.01974 0.02628 33.173 % ±25.000 % -8.173 % outside
Sn 0.317 Re 500 CL(30) 0.1379 0.1498 8.670 % ±25.000 % 16.330 % within
Sn 0.317 Re 500 CL(45) 0.1592 0.1445 -9.215 % ±25.000 % 15.785 % within
Sn 0.317 Re 500 CL(60) 0.1379 0.1268 -8.035 % ±25.000 % 16.965 % within
Sn 0.317 Re 500 CL(80) 0.05445 0.05922 8.757 % ±25.000 % 16.243 % within
Sn 0.317 Re 1000 CL(30) 0.1379 0.13 -5.709 % ±25.000 % 19.291 % within
Sn 0.317 Re 1000 CL(45) 0.1592 0.1254 -21.227 % ±25.000 % 3.773 % within
Sn 0.317 Re 1000 CL(60) 0.1379 0.11 -20.203 % ±25.000 % 4.797 % within
Sn 0.317 Re 1000 CL(80) 0.05445 0.05139 -5.633 % ±25.000 % 19.367 % within
Sn 0.317 Re 2000 CL(30) 0.1379 0.1207 -12.433 % ±25.000 % 12.567 % within
Sn 0.317 Re 2000 CL(45) 0.1592 0.1165 -26.844 % ±25.000 % -1.844 % outside
Sn 0.317 Re 2000 CL(60) 0.1379 0.1022 -25.893 % ±25.000 % -0.893 % outside
Sn 0.317 Re 2000 CL(80) 0.05445 0.04772 -12.362 % ±25.000 % 12.638 % within
Sn 0.317 Re 5000 CL(30) 0.1379 0.1313 -4.752 % ±25.000 % 20.248 % within
Sn 0.317 Re 5000 CL(45) 0.1592 0.1267 -20.428 % ±25.000 % 4.572 % within
Sn 0.317 Re 5000 CL(60) 0.1379 0.1111 -19.393 % ±25.000 % 5.607 % within
Sn 0.317 Re 5000 CL(80) 0.05445 0.05191 -4.675 % ±25.000 % 20.325 % within
Sn 0.317 Re 10000 CL(30) 0.1379 0.1394 1.115 % ±25.000 % 23.885 % within
Sn 0.317 Re 10000 CL(45) 0.1592 0.1345 -15.526 % ±25.000 % 9.474 % within
Sn 0.317 Re 10000 CL(60) 0.1379 0.118 -14.428 % ±25.000 % 10.572 % within
Sn 0.317 Re 10000 CL(80) 0.05445 0.0551 1.197 % ±25.000 % 23.803 % within

L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_D(0), tolerance 25 %

20 rows, 15 of 20 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 Re 500 CD( 0) 0.1427 0.2218 55.426 % ±25.000 % -30.426 % outside
Sn 0.130 Re 1000 CD( 0) 0.1427 0.1936 35.644 % ±25.000 % -10.644 % outside
Sn 0.130 Re 2000 CD( 0) 0.1427 0.1832 28.410 % ±25.000 % -3.410 % outside
Sn 0.130 Re 5000 CD( 0) 0.1427 0.2012 40.965 % ±25.000 % -15.965 % outside
Sn 0.130 Re 10000 CD( 0) 0.1427 0.2111 47.910 % ±25.000 % -22.910 % outside
Sn 0.144 Re 500 CD( 0) 0.1686 0.253 50.072 % ±25.000 % -25.072 % outside
Sn 0.144 Re 1000 CD( 0) 0.1686 0.2208 30.983 % ±25.000 % -5.983 % outside
Sn 0.144 Re 2000 CD( 0) 0.1686 0.2091 24.070 % ±25.000 % 0.930 % within
Sn 0.144 Re 5000 CD( 0) 0.1686 0.2297 36.243 % ±25.000 % -11.243 % outside
Sn 0.144 Re 10000 CD( 0) 0.1686 0.2409 42.901 % ±25.000 % -17.901 % outside
Sn 0.184 Re 500 CD( 0) 0.2517 0.3527 40.089 % ±25.000 % -15.089 % outside
Sn 0.184 Re 1000 CD( 0) 0.2517 0.3079 22.308 % ±25.000 % 2.692 % within
Sn 0.184 Re 2000 CD( 0) 0.2517 0.2922 16.057 % ±25.000 % 8.943 % within
Sn 0.184 Re 5000 CD( 0) 0.2517 0.3211 27.562 % ±25.000 % -2.562 % outside
Sn 0.184 Re 10000 CD( 0) 0.2517 0.3364 33.644 % ±25.000 % -8.644 % outside
Sn 0.317 Re 500 CD( 0) 0.6064 0.8522 40.540 % ±25.000 % -15.540 % outside
Sn 0.317 Re 1000 CD( 0) 0.6064 0.7452 22.897 % ±25.000 % 2.103 % within
Sn 0.317 Re 2000 CD( 0) 0.6064 0.7125 17.510 % ±25.000 % 7.490 % within
Sn 0.317 Re 5000 CD( 0) 0.6064 0.7859 29.619 % ±25.000 % -4.619 % outside
Sn 0.317 Re 10000 CD( 0) 0.6064 0.8195 35.156 % ±25.000 % -10.156 % outside

L6 ScreenKF2012 a3 0.017 a5 0.053 b4 0.092 b6 0.105, induction off, K = 1.16, C_L(theta), tolerance 25 %

80 rows, 60 of 80 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 Re 500 CL(30) 0.02468 0.0498 101.763 % ±25.000 % -76.763 % outside
Sn 0.130 Re 500 CL(45) 0.0285 0.04804 68.558 % ±25.000 % -43.558 % outside
Sn 0.130 Re 500 CL(60) 0.02468 0.04215 70.749 % ±25.000 % -45.749 % outside
Sn 0.130 Re 500 CL(80) 0.009749 0.01969 101.926 % ±25.000 % -76.926 % outside
Sn 0.130 Re 1000 CL(30) 0.02468 0.04342 75.889 % ±25.000 % -50.889 % outside
Sn 0.130 Re 1000 CL(45) 0.0285 0.04188 46.942 % ±25.000 % -21.942 % outside
Sn 0.130 Re 1000 CL(60) 0.02468 0.03674 48.852 % ±25.000 % -23.852 % outside
Sn 0.130 Re 1000 CL(80) 0.009749 0.01716 76.031 % ±25.000 % -51.031 % outside
Sn 0.130 Re 2000 CL(30) 0.02468 0.04109 66.442 % ±25.000 % -41.442 % outside
Sn 0.130 Re 2000 CL(45) 0.0285 0.03963 39.050 % ±25.000 % -14.050 % outside
Sn 0.130 Re 2000 CL(60) 0.02468 0.03477 40.857 % ±25.000 % -15.857 % outside
Sn 0.130 Re 2000 CL(80) 0.009749 0.01624 66.577 % ±25.000 % -41.577 % outside
Sn 0.130 Re 5000 CL(30) 0.02468 0.04513 82.844 % ±25.000 % -57.844 % outside
Sn 0.130 Re 5000 CL(45) 0.0285 0.04354 52.752 % ±25.000 % -27.752 % outside
Sn 0.130 Re 5000 CL(60) 0.02468 0.0382 54.738 % ±25.000 % -29.738 % outside
Sn 0.130 Re 5000 CL(80) 0.009749 0.01784 82.992 % ±25.000 % -57.992 % outside
Sn 0.130 Re 10000 CL(30) 0.02468 0.04738 91.926 % ±25.000 % -66.926 % outside
Sn 0.130 Re 10000 CL(45) 0.0285 0.0457 60.339 % ±25.000 % -35.339 % outside
Sn 0.130 Re 10000 CL(60) 0.02468 0.04009 62.424 % ±25.000 % -37.424 % outside
Sn 0.130 Re 10000 CL(80) 0.009749 0.01873 92.081 % ±25.000 % -67.081 % outside
Sn 0.144 Re 500 CL(30) 0.03052 0.05687 86.361 % ±25.000 % -61.361 % outside
Sn 0.144 Re 500 CL(45) 0.03524 0.05486 55.690 % ±25.000 % -30.690 % outside
Sn 0.144 Re 500 CL(60) 0.03052 0.04813 57.714 % ±25.000 % -32.714 % outside
Sn 0.144 Re 500 CL(80) 0.01205 0.02248 86.511 % ±25.000 % -61.511 % outside
Sn 0.144 Re 1000 CL(30) 0.03052 0.04958 62.454 % ±25.000 % -37.454 % outside
Sn 0.144 Re 1000 CL(45) 0.03524 0.04782 35.717 % ±25.000 % -10.717 % outside
Sn 0.144 Re 1000 CL(60) 0.03052 0.04195 37.482 % ±25.000 % -12.482 % outside
Sn 0.144 Re 1000 CL(80) 0.01205 0.01959 62.585 % ±25.000 % -37.585 % outside
Sn 0.144 Re 2000 CL(30) 0.03052 0.04694 53.809 % ±25.000 % -28.809 % outside
Sn 0.144 Re 2000 CL(45) 0.03524 0.04528 28.495 % ±25.000 % -3.495 % outside
Sn 0.144 Re 2000 CL(60) 0.03052 0.03972 30.166 % ±25.000 % -5.166 % outside
Sn 0.144 Re 2000 CL(80) 0.01205 0.01855 53.933 % ±25.000 % -28.933 % outside
Sn 0.144 Re 5000 CL(30) 0.03052 0.05158 69.035 % ±25.000 % -44.035 % outside
Sn 0.144 Re 5000 CL(45) 0.03524 0.04976 41.215 % ±25.000 % -16.215 % outside
Sn 0.144 Re 5000 CL(60) 0.03052 0.04365 43.051 % ±25.000 % -18.051 % outside
Sn 0.144 Re 5000 CL(80) 0.01205 0.02039 69.171 % ±25.000 % -44.171 % outside
Sn 0.144 Re 10000 CL(30) 0.03052 0.05413 77.373 % ±25.000 % -52.373 % outside
Sn 0.144 Re 10000 CL(45) 0.03524 0.05222 48.182 % ±25.000 % -23.182 % outside
Sn 0.144 Re 10000 CL(60) 0.03052 0.04581 50.108 % ±25.000 % -25.108 % outside
Sn 0.144 Re 10000 CL(80) 0.01205 0.02139 77.516 % ±25.000 % -52.516 % outside
Sn 0.184 Re 500 CL(30) 0.04997 0.07959 59.260 % ±25.000 % -34.260 % outside
Sn 0.184 Re 500 CL(45) 0.0577 0.07678 33.050 % ±25.000 % -8.050 % outside
Sn 0.184 Re 500 CL(60) 0.04997 0.06735 34.779 % ±25.000 % -9.779 % outside
Sn 0.184 Re 500 CL(80) 0.01974 0.03146 59.389 % ±25.000 % -34.389 % outside
Sn 0.184 Re 1000 CL(30) 0.04997 0.06937 38.809 % ±25.000 % -13.809 % outside
Sn 0.184 Re 1000 CL(45) 0.0577 0.06692 15.964 % ±25.000 % 9.036 % within
Sn 0.184 Re 1000 CL(60) 0.04997 0.0587 17.471 % ±25.000 % 7.529 % within
Sn 0.184 Re 1000 CL(80) 0.01974 0.02742 38.921 % ±25.000 % -13.921 % outside
Sn 0.184 Re 2000 CL(30) 0.04997 0.06578 31.634 % ±25.000 % -6.634 % outside
Sn 0.184 Re 2000 CL(45) 0.0577 0.06346 9.970 % ±25.000 % 15.030 % within
Sn 0.184 Re 2000 CL(60) 0.04997 0.05567 11.400 % ±25.000 % 13.600 % within
Sn 0.184 Re 2000 CL(80) 0.01974 0.026 31.741 % ±25.000 % -6.741 % outside
Sn 0.184 Re 5000 CL(30) 0.04997 0.07238 44.844 % ±25.000 % -19.844 % outside
Sn 0.184 Re 5000 CL(45) 0.0577 0.06983 21.006 % ±25.000 % 3.994 % within
Sn 0.184 Re 5000 CL(60) 0.04997 0.06126 22.579 % ±25.000 % 2.421 % within
Sn 0.184 Re 5000 CL(80) 0.01974 0.02861 44.961 % ±25.000 % -19.961 % outside
Sn 0.184 Re 10000 CL(30) 0.04997 0.07588 51.840 % ±25.000 % -26.840 % outside
Sn 0.184 Re 10000 CL(45) 0.0577 0.0732 26.850 % ±25.000 % -1.850 % outside
Sn 0.184 Re 10000 CL(60) 0.04997 0.06422 28.499 % ±25.000 % -3.499 % outside
Sn 0.184 Re 10000 CL(80) 0.01974 0.02999 51.962 % ±25.000 % -26.962 % outside
Sn 0.317 Re 500 CL(30) 0.1379 0.1959 42.064 % ±25.000 % -17.064 % outside
Sn 0.317 Re 500 CL(45) 0.1592 0.189 18.683 % ±25.000 % 6.317 % within
Sn 0.317 Re 500 CL(60) 0.1379 0.1658 20.226 % ±25.000 % 4.774 % within
Sn 0.317 Re 500 CL(80) 0.05445 0.07742 42.178 % ±25.000 % -17.178 % outside
Sn 0.317 Re 1000 CL(30) 0.1379 0.1706 23.758 % ±25.000 % 1.242 % within
Sn 0.317 Re 1000 CL(45) 0.1592 0.1646 3.390 % ±25.000 % 21.610 % within
Sn 0.317 Re 1000 CL(60) 0.1379 0.1444 4.734 % ±25.000 % 20.266 % within
Sn 0.317 Re 1000 CL(80) 0.05445 0.06744 23.858 % ±25.000 % 1.142 % within
Sn 0.317 Re 2000 CL(30) 0.1379 0.163 18.194 % ±25.000 % 6.806 % within
Sn 0.317 Re 2000 CL(45) 0.1592 0.1572 -1.258 % ±25.000 % 23.742 % within
Sn 0.317 Re 2000 CL(60) 0.1379 0.1379 0.026 % ±25.000 % 24.974 % within
Sn 0.317 Re 2000 CL(80) 0.05445 0.06441 18.289 % ±25.000 % 6.711 % within
Sn 0.317 Re 5000 CL(30) 0.1379 0.1802 30.717 % ±25.000 % -5.717 % outside
Sn 0.317 Re 5000 CL(45) 0.1592 0.1739 9.204 % ±25.000 % 15.796 % within
Sn 0.317 Re 5000 CL(60) 0.1379 0.1525 10.623 % ±25.000 % 14.377 % within
Sn 0.317 Re 5000 CL(80) 0.05445 0.07124 30.822 % ±25.000 % -5.822 % outside
Sn 0.317 Re 10000 CL(30) 0.1379 0.1882 36.464 % ±25.000 % -11.464 % outside
Sn 0.317 Re 10000 CL(45) 0.1592 0.1815 14.005 % ±25.000 % 10.995 % within
Sn 0.317 Re 10000 CL(60) 0.1379 0.1592 15.487 % ±25.000 % 9.513 % within
Sn 0.317 Re 10000 CL(80) 0.05445 0.07437 36.574 % ±25.000 % -11.574 % outside

L6 default law, K = 1, C_D(0), at the plan text's 20 % spread (reported)

reported; 20 rows, 4 of 20 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 Re 500 CD( 0) 0.1427 0.1775 24.355 % ±20.000 % -4.355 % outside
Sn 0.130 Re 1000 CD( 0) 0.1427 0.1547 8.400 % ±20.000 % 11.600 % within
Sn 0.130 Re 2000 CD( 0) 0.1427 0.1452 1.730 % ±20.000 % 18.270 % within
Sn 0.130 Re 5000 CD( 0) 0.1427 0.1585 11.096 % ±20.000 % 8.904 % within
Sn 0.130 Re 10000 CD( 0) 0.1427 0.1672 17.185 % ±20.000 % 2.815 % within
Sn 0.144 Re 500 CD( 0) 0.1686 0.199 18.063 % ±20.000 % 1.937 % within
Sn 0.144 Re 1000 CD( 0) 0.1686 0.1735 2.902 % ±20.000 % 17.098 % within
Sn 0.144 Re 2000 CD( 0) 0.1686 0.1626 -3.550 % ±20.000 % 16.450 % within
Sn 0.144 Re 5000 CD( 0) 0.1686 0.1774 5.241 % ±20.000 % 14.759 % within
Sn 0.144 Re 10000 CD( 0) 0.1686 0.1872 11.086 % ±20.000 % 8.914 % within
Sn 0.184 Re 500 CD( 0) 0.2517 0.264 4.861 % ±20.000 % 15.139 % within
Sn 0.184 Re 1000 CD( 0) 0.2517 0.23 -8.631 % ±20.000 % 11.369 % within
Sn 0.184 Re 2000 CD( 0) 0.2517 0.2148 -14.668 % ±20.000 % 5.332 % within
Sn 0.184 Re 5000 CD( 0) 0.2517 0.2338 -7.124 % ±20.000 % 12.876 % within
Sn 0.184 Re 10000 CD( 0) 0.2517 0.2473 -1.770 % ±20.000 % 18.230 % within
Sn 0.317 Re 500 CD( 0) 0.6064 0.5296 -12.654 % ±20.000 % 7.346 % within
Sn 0.317 Re 1000 CD( 0) 0.6064 0.4614 -23.909 % ±20.000 % -3.909 % outside
Sn 0.317 Re 2000 CD( 0) 0.6064 0.4257 -29.786 % ±20.000 % -9.786 % outside
Sn 0.317 Re 5000 CD( 0) 0.6064 0.4588 -24.333 % ±20.000 % -4.333 % outside
Sn 0.317 Re 10000 CD( 0) 0.6064 0.4886 -19.425 % ±20.000 % 0.575 % within

L6 default law, K = 1, C_L(theta), at the plan text's 20 % spread (reported)

reported; 80 rows, 25 of 80 outside the tolerance.

Case Measured Model Error Tolerance Margin Result
Sn 0.130 Re 500 CL(30) 0.02468 0.03565 44.440 % ±20.000 % -24.440 % outside
Sn 0.130 Re 500 CL(45) 0.0285 0.03439 20.668 % ±20.000 % -0.668 % outside
Sn 0.130 Re 500 CL(60) 0.02468 0.03017 22.237 % ±20.000 % -2.237 % outside
Sn 0.130 Re 500 CL(80) 0.009749 0.01409 44.556 % ±20.000 % -24.556 % outside
Sn 0.130 Re 1000 CL(30) 0.02468 0.03108 25.908 % ±20.000 % -5.908 % outside
Sn 0.130 Re 1000 CL(45) 0.0285 0.02998 5.186 % ±20.000 % 14.814 % within
Sn 0.130 Re 1000 CL(60) 0.02468 0.0263 6.554 % ±20.000 % 13.446 % within
Sn 0.130 Re 1000 CL(80) 0.009749 0.01228 26.009 % ±20.000 % -6.009 % outside
Sn 0.130 Re 2000 CL(30) 0.02468 0.02917 18.161 % ±20.000 % 1.839 % within
Sn 0.130 Re 2000 CL(45) 0.0285 0.02814 -1.286 % ±20.000 % 18.714 % within
Sn 0.130 Re 2000 CL(60) 0.02468 0.02468 -0.003 % ±20.000 % 19.997 % within
Sn 0.130 Re 2000 CL(80) 0.009749 0.01153 18.256 % ±20.000 % 1.744 % within
Sn 0.130 Re 5000 CL(30) 0.02468 0.03185 29.039 % ±20.000 % -9.039 % outside
Sn 0.130 Re 5000 CL(45) 0.0285 0.03073 7.802 % ±20.000 % 12.198 % within
Sn 0.130 Re 5000 CL(60) 0.02468 0.02696 9.204 % ±20.000 % 10.796 % within
Sn 0.130 Re 5000 CL(80) 0.009749 0.01259 29.143 % ±20.000 % -9.143 % outside
Sn 0.130 Re 10000 CL(30) 0.02468 0.0336 36.111 % ±20.000 % -16.111 % outside
Sn 0.130 Re 10000 CL(45) 0.0285 0.03241 13.710 % ±20.000 % 6.290 % within
Sn 0.130 Re 10000 CL(60) 0.02468 0.02843 15.189 % ±20.000 % 4.811 % within
Sn 0.130 Re 10000 CL(80) 0.009749 0.01328 36.221 % ±20.000 % -16.221 % outside
Sn 0.144 Re 500 CL(30) 0.03052 0.03998 31.023 % ±20.000 % -11.023 % outside
Sn 0.144 Re 500 CL(45) 0.03524 0.03857 9.459 % ±20.000 % 10.541 % within
Sn 0.144 Re 500 CL(60) 0.03052 0.03384 10.882 % ±20.000 % 9.118 % within
Sn 0.144 Re 500 CL(80) 0.01205 0.0158 31.129 % ±20.000 % -11.129 % outside
Sn 0.144 Re 1000 CL(30) 0.03052 0.03485 14.198 % ±20.000 % 5.802 % within
Sn 0.144 Re 1000 CL(45) 0.03524 0.03362 -4.596 % ±20.000 % 15.404 % within
Sn 0.144 Re 1000 CL(60) 0.03052 0.02949 -3.356 % ±20.000 % 16.644 % within
Sn 0.144 Re 1000 CL(80) 0.01205 0.01377 14.291 % ±20.000 % 5.709 % within
Sn 0.144 Re 2000 CL(30) 0.03052 0.03266 7.037 % ±20.000 % 12.963 % within
Sn 0.144 Re 2000 CL(45) 0.03524 0.03151 -10.579 % ±20.000 % 9.421 % within
Sn 0.144 Re 2000 CL(60) 0.03052 0.02764 -9.416 % ±20.000 % 10.584 % within
Sn 0.144 Re 2000 CL(80) 0.01205 0.01291 7.124 % ±20.000 % 12.876 % within
Sn 0.144 Re 5000 CL(30) 0.03052 0.03564 16.794 % ±20.000 % 3.206 % within
Sn 0.144 Re 5000 CL(45) 0.03524 0.03438 -2.428 % ±20.000 % 17.572 % within
Sn 0.144 Re 5000 CL(60) 0.03052 0.03016 -1.159 % ±20.000 % 18.841 % within
Sn 0.144 Re 5000 CL(80) 0.01205 0.01409 16.888 % ±20.000 % 3.112 % within
Sn 0.144 Re 10000 CL(30) 0.03052 0.03762 23.280 % ±20.000 % -3.280 % outside
Sn 0.144 Re 10000 CL(45) 0.03524 0.03629 2.991 % ±20.000 % 17.009 % within
Sn 0.144 Re 10000 CL(60) 0.03052 0.03184 4.330 % ±20.000 % 15.670 % within
Sn 0.144 Re 10000 CL(80) 0.01205 0.01487 23.380 % ±20.000 % -3.380 % outside
Sn 0.184 Re 500 CL(30) 0.04997 0.05341 6.873 % ±20.000 % 13.127 % within
Sn 0.184 Re 500 CL(45) 0.0577 0.05152 -10.716 % ±20.000 % 9.284 % within
Sn 0.184 Re 500 CL(60) 0.04997 0.0452 -9.555 % ±20.000 % 10.445 % within
Sn 0.184 Re 500 CL(80) 0.01974 0.02111 6.959 % ±20.000 % 13.041 % within
Sn 0.184 Re 1000 CL(30) 0.04997 0.04654 -6.877 % ±20.000 % 13.123 % within
Sn 0.184 Re 1000 CL(45) 0.0577 0.04489 -22.203 % ±20.000 % -2.203 % outside
Sn 0.184 Re 1000 CL(60) 0.04997 0.03938 -21.192 % ±20.000 % -1.192 % outside
Sn 0.184 Re 1000 CL(80) 0.01974 0.01839 -6.802 % ±20.000 % 13.198 % within
Sn 0.184 Re 2000 CL(30) 0.04997 0.04346 -13.030 % ±20.000 % 6.970 % within
Sn 0.184 Re 2000 CL(45) 0.0577 0.04193 -27.343 % ±20.000 % -7.343 % outside
Sn 0.184 Re 2000 CL(60) 0.04997 0.03678 -26.399 % ±20.000 % -6.399 % outside
Sn 0.184 Re 2000 CL(80) 0.01974 0.01718 -12.960 % ±20.000 % 7.040 % within
Sn 0.184 Re 5000 CL(30) 0.04997 0.0473 -5.342 % ±20.000 % 14.658 % within
Sn 0.184 Re 5000 CL(45) 0.0577 0.04563 -20.920 % ±20.000 % -0.920 % outside
Sn 0.184 Re 5000 CL(60) 0.04997 0.04003 -19.892 % ±20.000 % 0.108 % within
Sn 0.184 Re 5000 CL(80) 0.01974 0.0187 -5.265 % ±20.000 % 14.735 % within
Sn 0.184 Re 10000 CL(30) 0.04997 0.05003 0.115 % ±20.000 % 19.885 % within
Sn 0.184 Re 10000 CL(45) 0.0577 0.04826 -16.361 % ±20.000 % 3.639 % within
Sn 0.184 Re 10000 CL(60) 0.04997 0.04234 -15.274 % ±20.000 % 4.726 % within
Sn 0.184 Re 10000 CL(80) 0.01974 0.01977 0.196 % ±20.000 % 19.804 % within
Sn 0.317 Re 500 CL(30) 0.1379 0.1468 6.503 % ±20.000 % 13.497 % within
Sn 0.317 Re 500 CL(45) 0.1592 0.1417 -11.025 % ±20.000 % 8.975 % within
Sn 0.317 Re 500 CL(60) 0.1379 0.1243 -9.868 % ±20.000 % 10.132 % within
Sn 0.317 Re 500 CL(80) 0.05445 0.05804 6.589 % ±20.000 % 13.411 % within
Sn 0.317 Re 1000 CL(30) 0.1379 0.1279 -7.221 % ±20.000 % 12.779 % within
Sn 0.317 Re 1000 CL(45) 0.1592 0.1234 -22.490 % ±20.000 % -2.490 % outside
Sn 0.317 Re 1000 CL(60) 0.1379 0.1083 -21.482 % ±20.000 % -1.482 % outside
Sn 0.317 Re 1000 CL(80) 0.05445 0.05056 -7.146 % ±20.000 % 12.854 % within
Sn 0.317 Re 2000 CL(30) 0.1379 0.118 -14.386 % ±20.000 % 5.614 % within
Sn 0.317 Re 2000 CL(45) 0.1592 0.1139 -28.476 % ±20.000 % -8.476 % outside
Sn 0.317 Re 2000 CL(60) 0.1379 0.0999 -27.546 % ±20.000 % -7.546 % outside
Sn 0.317 Re 2000 CL(80) 0.05445 0.04666 -14.317 % ±20.000 % 5.683 % within
Sn 0.317 Re 5000 CL(30) 0.1379 0.1272 -7.737 % ±20.000 % 12.263 % within
Sn 0.317 Re 5000 CL(45) 0.1592 0.1227 -22.922 % ±20.000 % -2.922 % outside
Sn 0.317 Re 5000 CL(60) 0.1379 0.1077 -21.919 % ±20.000 % -1.919 % outside
Sn 0.317 Re 5000 CL(80) 0.05445 0.05028 -7.663 % ±20.000 % 12.337 % within
Sn 0.317 Re 10000 CL(30) 0.1379 0.1355 -1.754 % ±20.000 % 18.246 % within
Sn 0.317 Re 10000 CL(45) 0.1592 0.1307 -17.923 % ±20.000 % 2.077 % within
Sn 0.317 Re 10000 CL(60) 0.1379 0.1146 -16.856 % ±20.000 % 3.144 % within
Sn 0.317 Re 10000 CL(80) 0.05445 0.05354 -1.674 % ±20.000 % 18.326 % within

Data provenance

Every measured number in the tables above comes from these files (contract C6); the header of each gives the paper, the table or figure, how it was obtained and its uncertainty.

rudi1988_kf2012fig5_digitised.csv

tests/data/rudi1988_kf2012fig5_digitised.csv, 24 rows.

Field Value
source Rudi H, Loland G, Furunes I (1988), Modellforsok med noter. Krefter og gjennomstromning pa enkeltpaneler og merdsystemer, SINTEF report (in Norwegian); available only via Kristiansen T, Faltinsen OM (2012), Modelling of current loads on aquaculture net cages, J. Fluids Struct. 34, 218-235 (KF2012)
location KF2012 Fig. 5 (journal p. 224, PDF p. 7)
kind digitised
uncertainty +-0.005 (marker centres read from the PDF vector drawing, axes calibrated on the tick marks; not eye-read)
units sn [-], theta_deg [deg], cd_over_cd0 [-], cl_over_cl45 [-]
notes Rudi 1988 itself is not in background/; these values are KF2012's plot of it. The report is dated 1988 in KF2012 and 1989 in MF2022 ref. [7].
notes Flat 1.5 x 1.5 m panels on a stiff frame, angles 0-90 deg; each value is the average over the three towing speeds 0.159, 0.316 and 0.966 m/s (KF2012 p. 224). Drag normalised by its theta = 0 value, lift by its theta = 45 deg value. The Sn = 0.243 net deformed strongly and is not plotted by KF2012.
notes The Sn = 0.144 triangle markers sit 0.004 above their data point in the drawing (their bounding-box centre reads 1.004 at both normalisation points and 0.004 at the lift zeros); 0.004 is subtracted from every 0.144 value.
notes Where two nets share a position the markers coincide in the drawing (e.g. all four at cd_over_cd0 = 1 at 0 deg). The 1.000 values at the normalisation angles are read from the figure, not set.
sn theta_deg cd_over_cd0 cl_over_cl45
0.130 0 1.000 0.000
0.130 30 0.845 1.000
0.130 45 0.655 1.000
0.130 60 0.483 0.909
0.130 80 0.276 0.455
0.130 90 0.000 0.000
0.144 0 1.000 0.000
0.144 30 0.778 1.091
0.144 45 0.635 1.000
0.144 60 0.492 0.909
0.144 80 0.238 0.636
0.144 90 0.032 0.000
0.184 0 1.000 0.000
0.184 30 0.736 1.000
0.184 45 0.626 1.000
0.184 60 0.549 0.800
0.184 80 0.231 0.350
0.184 90 0.011 0.000
0.317 0 1.000 0.000
0.317 30 0.792 1.019
0.317 45 0.575 1.000
0.317 60 0.389 0.769
0.317 80 0.131 0.308
0.317 90 0.023 0.000

loland1991_eq4.csv

tests/data/loland1991_eq4.csv, 3 rows.

Field Value
source Loland G (1991), Current forces on and flow through fish farms, PhD thesis, Norwegian Institute of Technology, Trondheim; available only via Kristiansen T, Faltinsen OM (2012), J. Fluids Struct. 34, 218-235 (KF2012)
location KF2012 Eq. 4 (journal p. 222, PDF p. 5); KF2012 Eq. 15 (journal p. 226) in the notes
kind equation
uncertainty coefficients copied exactly from KF2012 Eq. 4 (checked on the page image); the fit is to Rudi et al. (1988) towed panels
units quantity_id [-], angle_fn [-], c0 [-], c1 [-], c2 [-], c3 [-], sn_min [-], sn_max [-]
notes The coefficient = c0 + c1 Sn + c2 Sn^2 + c3 Sn^3 multiplies the angle function angle_fn: 0 = 1, 1 = cos(theta), 2 = sin(2 theta); a quantity is the sum of its rows. quantity_id 1 = C_D, 2 = C_L, both on the panel area and the free-stream speed (KF2012 Eq. 1).
notes As printed: C_D(Sn, theta) = 0.04 + (-0.04 + 0.33 Sn + 6.54 Sn^2 - 4.88 Sn^3) cos(theta); C_L(Sn, theta) = (-0.05 Sn + 2.3 Sn^2 - 1.76 Sn^3) sin(2 theta); valid for Sn 0.13-0.317 and theta 0-90 deg. KF2012 §2.5.1: Loland's C_D(0) agrees with KF Eq. 9 for Re >~ 500.
notes Loland's wake engineering formula, quoted by KF2012 Eq. 15 and not a row: r = 1.0 - 0.46 c_d, with c_d = C_D(0). The thesis itself is not in background/.
quantity_id angle_fn c0 c1 c2 c3 sn_min sn_max
1 0 0.04 0 0 0 0.13 0.317
1 1 -0.04 0.33 6.54 -4.88 0.13 0.317
2 2 0 -0.05 2.3 -1.76 0.13 0.317